User's Manual

Ultraview Care Network
4-16
Defining Preselected Recording Keys
The Preselected Recordings function enables you to define which beds and
parameters will be automatically recorded. The preselected group is established
by the system administrator. For UCW and Ultraview 1700 monitors this is set up
through the Clinical level of the Privileged Access menu.
To define the PRESELECTED A
and B parameters (UCW and
Ultraview 1700):
1 Touch MONITOR SETUP.
2 Touch PRIVILEGED ACCESS.
3 Enter Clinical password.
4 Touch PRESELECTED
RECORDINGS.
5 Touch key to be defined
(A or B).
6 Touch SELECT TYPE.
7a Touch FIRST 2 BEDSIDE
PARAM(S) and use arrow keys
to cycle through parameter
selections: ALL BEDSIDE
PARAM(S) or FIRST n
BEDSIDE PARAM(S)
(where n is 1, 2, 4 or 8).
-OR-
7b Touch CONFIGURED
PARAMETERS and toggle
desired parameters ON or
OFF.
8 Touch PREVIOUS menu twice
to define the remaining
PRESELECTED key.
To define the PRESELECTED A
and B beds (UCW and Ultraview
1700):
1 Touch MONITOR SETUP.
2 Touch PRIVILEGED ACCESS.
3 Enter Clinical password.
4 Touch PRESELECTED
RECORDINGS.
5 Touch key to be defined
(A or B).
6 Touch SELECT BEDS.
7a Select ALL SUBNETS.
-OR-
7b Select THIS SUBNET.
-OR-
7c Select THIS MONITOR.
8 Touch PREVIOUS menu twice
to define the remaining
PRESELECTED key.