User's Manual

Printing
4-9
PrintMaster Display Messages
Table 2: Printer Display Messages
Message Text Reason
ON-LINE Ready to receive data.
OFF-LINE Not ready to receive data.
DATA PRESENT Print data is in buffer.
PRINTING Data is being received and printed.
POWER SAVING Power saving mode is active.
LOW TONER
Toner is running out. 100 more pages can be printed when this
message is first displayed.
TONER EMPTY REPLACE TNR CART
Toner cartridge is empty. Printer will stop receiving printing until
toner cartridge is replaced.
TONER SENSOR Malfunction of toner sensor is detected.
RESET
Manual reset was initiated. All temporary fonts and macros are
deleted.
PRINT FONTS Font page is printing.
DRUM CLEANING Drum cleaning page is printing.
PRINT DEMO PAGE Demo page is printing.
PRINT MENU Menu page is printing.
CHANGE DRUM Drum near 90% of life. Change drum and reset drum counter.
FUSER LIFE Fuser near end of life. Contact service.
COPY nnn/mmm
Indicates number of copies printed.
nnn = page being printed.
mmm = total copies requested.
STACKER FULL
REMOVE THE PAPER
Paper exit bin is full. Printing is stopped until paper is removed.
mmmmm MANUAL PAPER REQUEST
Insert requested paper. Printing is stopped until paper is
provided or RECOVER is pressed.
mmmmm = requested size.
mmmmm ttttttt PAPER REQUEST
Paper size mmmmm requested at tray ttttttt. Printing is stopped
until paper is provided or RECOVER is pressed.
PAPER OUT ttttttt
Paper is out at tray ttttttt. Printing is stopped until paper is
provided.
ERROR MEMORY OVERFLOW
Page data exceeds available memory. Press RECOVER to
continue. Adjust RASTER BUFFER, RECEIVE BUFFER, and/or
FONT PROTECT in menu, and resend job.
ERROR RECEIVE BUFFER OVERFLOW
Received buffer overflow. Data was lost. Press RECOVER to
continue, and resend job.