User's Manual

Contents
3-3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Entering New Patient Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Changing Patient Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Discharging a Patient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Admit/Discharge Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Admit/Discharge
Overview
This chapter describes how to enter new patient data, change data for an existing
patient, and delete patient data from a Ultraview Care Network monitor.
You can access the Admit/Discharge menu on either the central or bedside
monitor. However, if you are accessing this menu at a central monitor, you must
also select the patient’s bed (this is not necessary at a bedside monitor).