User's Manual

System Introduction and Network Basics
1-3
Monitor Basics
Ultraview Care Network monitors use modules to monitor various clinical
parameters. For example:
• Electrocardiograph (ECG). Refer to ECG on page 8-3.
• Noninvasive Blood Pressure (NIBP). Refer to NIBP on page 13-3.
• Cardiac Output (CO). Refer to Cardiac Output on page 19-3.
Remote module housing units may be used with Ultraview Care Network monitors
to house additional modules. The 90385 Universal Clinical Workstation (UCW
®
),
90363 Ultraview 1500, 90364 Ultraview 1600, and 90387 Ultraview 1700 monitors
must use a remote module housing unit to house any of its modules.
• Each 90499 module housing holds up to two modules.
• Each 90491 module housing holds up to four modules.
An external power supply is needed whenever a module housing is used. A
separate power supply is required for the 90491 and 90499 module housing.
WARNING:
• Due to the potential for electromagnetic interference,
portable communication transmitters and cellular phones
should not be operated within 3.5 feet (1.07 meters) of the
patient, patient leads, or associated patient monitoring
equipment.
!
• All references to the Universal Clinical Workstation or UCW
include the Universal Clinical Workstation-Independent Display
(UCW-ID), and all the available features of the UCW-ID.