User's Manual

Ultraview Care Network
7-34
Restoring Factory Settings
The Factory Default feature changes the user-configurable settings for all
parameters in the module to the factory default settings.
Restoring User-Defined Settings
The Restore Settings feature changes the user-configurable settings for all
parameters in the module to the defaults previously stored as user settings.
!
• Alarm ON/OFF status and alarm limits for all parameters are
reset to the factory default settings.
!
• Once restored, alarm ON/OFF status and alarm limits for all
parameters in the module are reset to the previously stored user
settings.
To restore factory settings:
Module Configurations with ECG
1 Touch ECG.
2 Touch SETUP.
3 Touch CONFIG.
4 Touch the hidden key 3 times.
5 Touch FACTORY DEFAULTS.
6 Select YES.
Module Configurations without
ECG
1 Touch TEMP.
2 Refer to steps 4 though 6
above.
To restore user-defined settings:
Module Configurations with ECG
1 Touch ECG.
2 Touch SETUP.
3 Touch RESTORE SETTINGS.
4 Select YES.
Module Configurations without
ECG
1 Touch TEMP.
2 Refer to steps 3 and 4 above.