User's Manual

6-9
Central Monitors Troubleshooting Guide
Clinical Situation Possible Cause Solution
Cannot assign color to a
zone
■ Monitor may not be set up to allow
you to assign colors.
■ Contact your system administrator.
Cannot assign a
parameter to a zone
■ Zone may not have been cleared of
previous assigned waveforms.
■ Select CLEAR ZONE, then touch the
zone in which to display the new
parameter. Repeat the initial
SCREEN FORMAT steps.
Cannot access the clock
menu
■ Clock may have been left in
STOPWATCH or TIMER mode.
■ Touch the clock/timer display, then
touch PREVIOUS MENU to restore
the clock.
CANNOT deselect ALARM
WATCH
■ The Ultraview Central Monitor is
configured with Central Alarm Watch
Manager to prevent de-selection of
automatically alarm watched beds.
■ Contact your system administrator.