User's Manual

www.spacelabshealthcare.com 061-2050-00 Rev. D 9/09
91367 SL2200 Compact Monitor
Trends
Graphic 1-, 2-, 6-,12-, or
24-hour segments; data is
stored in 1-minute resolution
Tabular Time increments of 1,
5, 10, 15, or 30 minutes; 1, 1.5,
or 3 hours
Power An external direct current
(DC) power supply provides power
to the monitors and up to three
Flexport
®
system interfaces
Advanced Power Management
Maximizes battery performance
during transport; includes battery
“fuel-gauge”
Connectors Three standard
USB 1.1 connectors (keyboard,
mouse or barcode scanner),
synchronous data link control
(SDLC for Flexport systems or
module housings), RJ45
(10/100BaseT Ethernet), remote
alarm light, VGA output (video),
RS-232 serial connector
Network Communication
10/100 BaseT modular connector
(RJ45) provided; wireless is
optional; will send data, including
all available waveforms and
numerics, to the Ultraview SL
network
Barcode Scanner Support
Provides support for using
third-party USB-powered
barcode
scanners; for entering patient
demographic data into a patient’s
Admit Record (limited to
128 ASCII characters); this
feature is only available in the
bedside mode. USB-powered bar
code scanners must be purchased
from the manufacturer
Options
03 Three display zones
04 Four display zones
D Perioperative; provides
customizable, user-specific
display setups and start case/end
case functions
Note The SL2200 does not
support the 91388 Remote
Display Controller.
N Vital Signs Calculations
(Hemodynamics, Oxygenation,
Ventilation, and Renal)
O Drug Dose Calculations
Q Data Shuttle
®
(for use with
selected modules only) supports
transfer for up to 24 hours of the
database from the monitor,
including continuous and episodic
events, and trend information for
all parameters monitored by
modules and Flexport system
interfaces
R Patient Data Logger; presents
an ASCII data stream of patient
name and vital sign data to the
serial port in a pre-defined format
U Dual Channel Internal
Recorder
Printing Method Thermal
array print head
Resolution Eight dots per mm
(vertical) and 32 dots per mm
(horizontal) at 25 mm per
second sweep speed
Paper Heat-sensitive roll of
paper, 50 mm wide × 30 m long
Prints Manual and automatic
alarm recordings for waveforms
and vital sign data, trends,
calculations; full annotations are
included
Frequency Response
Determined by the parameter
recorded
Paper Speed 1.56, 3.12, 6.25,
12.5, 25, and 50 mm per
second (depending on the
monitor sweep speed selected)
Alarm Record Records any
parameters in an alarm state
when alarm recording is active
Auto Run 20 seconds or
duration of alarm violation
(whichever is longer)
Controls CONVERT TO
CONTINUOUS, STOP
RECORDING, SLOW ON/OFF,
PRINTER ON/OFF
Indicators Paper out, unit off
Record Enables selection of
up to two active monitor
channels plus trends
X Wireless Ethernet
Communication; provides
802.11a/b/g wireless ethernet with
WEP, WPA, and WPA2 security;
requires site qualification survey to
ensure adequate performance