User's Manual
Table Of Contents
- Volume III
- e. Technical Description Of Operation
- Fixed channel Mode
- Auto-select Channel Mode
- g. OEM radio card
- All three cards have a transmitting frequency range of 2.4 GHz to 2.4835 GHz with a transmitting power measured at the antenna of 100 milliwatts. The radio functions as a "frequency hopper" and by definition will "hop" between a preset range of frequenci
- h. Understanding Signal Interference
- Physical Obstructions and Communication Range
- RF Interference
- i. Coverage Area
- j. Possible Monitor & WNI Configurations
- k. Communication Limitations of the Wireless Network
- m. Installation Hardware
DIRECTED LINK. To enable the Directed Link display, on the Site Survey main screen place the mouse
pointer over a displayed master and click. A Directed Link allows measurement of the data throughput
from the laptop to the WNI.
The desired minimum data throughput from the laptop to the WNI, in a Directed Link, is 40
Kbytes/second. Signal strength should not
go below 40%.
Part Number 062-0983-01 Rev C page 3 - 35