User's Manual
Table Of Contents
- Volume III
- e. Technical Description Of Operation
- Fixed channel Mode
- Auto-select Channel Mode
- g. OEM radio card
- All three cards have a transmitting frequency range of 2.4 GHz to 2.4835 GHz with a transmitting power measured at the antenna of 100 milliwatts. The radio functions as a "frequency hopper" and by definition will "hop" between a preset range of frequenci
- h. Understanding Signal Interference
- Physical Obstructions and Communication Range
- RF Interference
- i. Coverage Area
- j. Possible Monitor & WNI Configurations
- k. Communication Limitations of the Wireless Network
- m. Installation Hardware
b. Using the Proxim RangeLAN2 PCMCIA card for Site Survey.
Equipment required:
Laptop computer with RangeLAN2 PCMCIA card installed and RL2SETUP program loaded.
Spacelabs Medical 90310 WNI with 90486 power supply
Starting the RangeLAN2 program:
Double-click on the Pnetcon.exe icon on the Desktop.
The program Main Window is as follows:
Performing an RF Sweep:
• Start the RangeLAN2 program.
• Select SNOOP.
The display below will appear:
Part Number 062-0983-01 Rev C page 3 - 32