User's Manual
Table Of Contents
- Volume III
- e. Technical Description Of Operation
- Fixed channel Mode
- Auto-select Channel Mode
- g. OEM radio card
- All three cards have a transmitting frequency range of 2.4 GHz to 2.4835 GHz with a transmitting power measured at the antenna of 100 milliwatts. The radio functions as a "frequency hopper" and by definition will "hop" between a preset range of frequenci
- h. Understanding Signal Interference
- Physical Obstructions and Communication Range
- RF Interference
- i. Coverage Area
- j. Possible Monitor & WNI Configurations
- k. Communication Limitations of the Wireless Network
- m. Installation Hardware
Cover, Left, 90310 200-0205-00
Cover, Right, 90310 200-0204-00
Cover, Rear Panel, DC, 90310 200-0209-00
Cover, Bottom, 90310 200-0206-00
Cover, Front Panel, 90310 200-0207-00
Label, Front Panel, 90310 334-1440-00
Cable Assy, PCB To Power Supply, 90310 175-0939-00
Cable Assy, Ribbon, AUI, 90310 175-0938-00
Power Supply 90486
Meter, Microwave Leakage Detector 149-0002-00
90367 / 90369 Wireless Ethernet Option Parts
Proxim Radio card -- requires the use of software version 1.57M 010-0914-04
Proxim Radio card -- requires the use of software version 1.8EB 010-0914-05
Cable, Antenna, 90363/90369 (cable from stubby antenna to radio card) 175-0922-01
Cable, Flex Circuit, 90363/90369 (ribbon cable from radio card to Main Board) 175-1002-01
Ranger Antenna, 2.4 GHz Dipole (stubby antenna) 117-0029-00
Part Number 062-0983-01 Rev C page 3 - 18