Instructions / Assembly

ÉTAPE 1 ÉTAPE 2 ÉTAPE 3
ÉTAPE 4 ÉTAPE 5
1
2
x5
9
8
x3
5
7L
7R
x3
9
x3
x3
13
8
3
1
11
x3
6
12
13
4
x4
4
10
13
5
55403 / 57906
DELUXE AIR GRID TASK CHAIR
OPERATING INSTRUCTIONS
55403 / 57906
FAUTEUIL DE BUREAU AIR GRID DE LUXE
INSTRUCTIONS DE MONTAGE
2
1
3
55403
57906
4
2
1
3
4
© Office Star Products Juin 2010
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1). To lower
seat height sit on chair and lift lever(1).
NOTE: It is normal for chair to slightly lower under body weight.
• SYNCHRO TILT
To lock return chair to the upright position and push lever (1) in.
To unlock pull lever (1) out.
• TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the tilting
feature. Turn knob (2) clockwise to increase tension and counter-
clockwise to decrease or ease the tension.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms to move up
or down freely. Release the button (3) once the desired height
is reached.
• HEADREST ADJUSTMENT
To adjust the height of the headrest, first loosen the adjustment knob
(4) at the back of the headrest by turning it counterclockwise. Do not
over loosen the adjustment knob (4). Move the headrest to a desired
height and tighten the adjustment knob (4) by turning it clockwise.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are securely
tightened.
3. Check that all bolts screws and knobs are tight every three months
or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE
®
chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que
les quantités des pièces sont correctes.
ÉTAPE 1 Insérer les roulettes (2) dans la base (1), et vous assurer que toutes les roulettes (2) sont bien insérées.
ÉTAPE 2 Fixer les accoudoirs (7L et 7R) au coussin du siège (5) avec trois vis de siège (9) et trois rondelles plates (8) pour chaque accoudoir.
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixer la plaque du siège (4) au coussin du siège (5) avec quatre vis de plaque du siège (10). RESSERRER COMPLÈTEMENT TOUTES
LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixer le support du dossier (12) à l’arrière de la plaque du siège (4) avec trois vis de support du dossier (11). RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT
TOUTES LES VIS.
PIÈCE QTÉ
1. Base .......................1
2. Roulettes ....................5
3. Vérin pneumatique ............1
4. Plaque du siège ...............1
5. Coussin du siège ..............1
6. Coussin du dossier ............1
7. Accoudoirs (7L et 7R) ..........2
8. Rondelles plates ..............6
9. Vis du siège ..................6
10. Vis de la plaque du siège ......4
11. Vis du support du dossier ......3
12. Support du dossier (préinstallé) . . 1
13. Clé Allen (non montré) .........1