Operation Manual

The Bluetooth OBD-II Car
Controller is connected to
a vehicle's OBD-II jack but
not functioning. None of
the 3 LEDs are lit.
The equipment is not
correctly seated in the
OBD-II jack.
Plug the equipment
correctly into the OBD-II
jack.
One or more of the
equipment connecting
contacts (pins) is / are
bent.
Carefully straighten the
bent connecting contacts
(pins). Then correctly
plug the equipment into
the vehicle's OBD-II jack.
The equipment and / or
the vehicle's OBD-II jack
is defective.
Please contact a qualified
professional.
The Bluetooth OBD-II Car
Controller won't connect
to the App or the
PC software
Incorrect PIN number
Re-establish the
connection
using the correct PIN
number.
Bluetooth
The Bluetooth OBD-II Car
Controller is defective.
Please contact a qualified
professional.
The App software isn't
working right and shuts
down prematurely.
An error occurred during
installation.
Delete and reinstall the
App.
If the actions listed do not correct the
equipment defect, please contact a
qualified professional.
The table for troubleshooting, possible
causes and their solutions does not
include all possible errors.
Solutions, correctionPossible causesError / Malfunction
4.4 Troubleshooting
®
35
GB
80290_OBDII_Bluetooth_Manual_15_05_2013_Bocklet_print
Mittwoch, 15. Mai 2013 11:04:57