Full Product Manual

Comfort Line Products, Inc.
7
3. Always operate spa with suffi cient water. Water level must be
above fi lter. Insuffi cient water will cause pump failure and void
warranty.
4. Maintain proper water PH (7.4 - 7.6 is ideal). Failure to do so
may cause damage to vinyl liner, pump seals, heater element, and
damage will not be covered by warranty.
5. Install spa only on fl oors or areas that can withstand repeated
water exposure. Equipment failure as well as splashing, fi lling and
draining will spill water. If located in a multi-story building, care
must be taken to protect the objects on the fl oors below.
6. Install only on fl oors that can withstand the fl oor loading of your
spa. If in doubt, please consult an architect or engineer to determine
the fl oor rating before fi ling. See specifi cations.
7. Do not open Power Pack or the GFCI. Opening either component
will void the warranty.
8. When storing, always drain all water from tub, plumbing and
Power Pack, especially in freezing temperature as freeze damage is
not covered by warranty.
9. Always maintain proper water sanitation with chemicals and routine
cleaning. Warm water is an ideal place for bacteria to thrive. It’s
your sole responsibility to maintain proper water sanitation. Read
the sections on water chemistry and fi lter maintenance.
10. Never add water to chemicals. Always add chemicals to water to
avoid strong fumes or violent reactions that may result in hazardous
chemical spray.
SAVE THESE INSTRUCTIONS.