Full Product Manual

User’s Guide
14
7. Connect the infl ation hose to the
blower exhaust fi tting on the top
of the power pack.
Insert the key lock pin into the
infl ation hose fi tting on the top of
the power pack.
The key lock pin must be
inserted into the adapter of the infl ation hose fi tting
when infl ating. Failure to insert the key lock pin may
result in injury.
8. Plug the power pack into the electric outlet. Press the Turbo Wave
On/Off button to start the infl ation.
NOTE: The power pack will make a rattling noise while
the pump is running with no water. This is normal.
Do not run the power pack without water for more
than 15 minutes.
9. Use the infl ation hose to infl ate the bladder cover and the connection
collar. ere are two infl ation fi ttings on the infl atable bladder
cover. Pinch the transparent fi ll valves while fi lling the cover to
ensure good air fl ow through the valve.
NOTE: After infl ating the cover and collar, unplug the
power pack while assembling and fi lling the
spa with water.
+EY,OCK
0IN