Quick Start Guide The SOYO CD Quick BIOS Setup Hardware Installation Introduction SY-6BE+ Motherboard
SOYO ™ SY-6BE+ Motherboard Pentium ® III, Pentium ® II & CeleronTM processors 82440 BX AGP/PCI Motherboard 66&100MHz Front Side Bus supported ATX Form Factor Copyright © 1999 bySoyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies.
SY-6BE+ Quick Start Guide 1 Introduction This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6BE+ Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.
SY-6BE+ Quick Start Guide SY-6BE+ Motherboard Layout PS/2 KB Connector PS/2 Mouse Connector JP10 Introduction USB 1 USB 2 DIMM 1 DIMM 2 DIMM 3 3 1 1 Slot 1 for PentiumSlot II1Processor CPUFAN FDC PRT COM 1 COM 2 1 Intel ATX Power 82443 BX 1 AGP Slot Ultra I/O Chipset 1 IDE 2 IDE 1 PCI Slot #1 TM 1 IR1 5 SB-LINK (PC-PCI) PCI Slot #2 JP5 JP44 3 1 BIOS Flash Wake on LAN 1 3 PCI Slot #3 Intel PCI Slot #4 82371 EB _ ISA Slot #1 Speaker ISA Slot #2 Keylock + _ HDD LED
SY-6BE+ Quick Start Guide 2 Installation l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-6BE+ Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6BE+ Motherboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz 266MHz (66 x 4.0) 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0) 433MHz (66 x 6.5) 450MHz (100 x 4.5) 500MHz (100 x 5.0) 550MHz (100 x 5.5) 600MHz (100 x 6.
SY-6BE+ Quick Start Guide Make Connections to the Motherboard Step 2. This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
SY-6BE+ Quick Start Guide Step 3. Configure Memory Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz front side bus CPUs use 12ns or faster memory; for 100MHz front side bus CPUs use 8ns (100MHz, PC100 compliant) memory.
SY-6BE+ Quick Start Guide Step 6. Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap. CMOS Clearing JP5 Setting Clear CMOS Data Short pin 2-3 for at least 5 seconds to clear the CMOS. 1 2 3 Retain CMOS Data Short pin 1-2 to retain the 1 2 3 new settings.
SY-6BE+ Quick Start Guide 3 Quick BIOS Setup This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program.
SY-6BE+ Quick Start Guide The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-6BE+ Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Step 1.
SY-6BE+ Quick Start Guide The SOYO CD The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file.
SY-6BE+ Quick Start Guide driver revision: Intel inf utility for Win 95 Intel BusMaster Drivers for Win 95 Intel BusMaster Drivers for Win NT Intel BusMaster Drivers for OS/2 OS/2) Winbond hardware doctor (ver 1.4) for win 95/98 Winbond hardware doctor for win NT Cancel OK (Driver Installation Menu) However, to display the list of all drivers software available with SOYO Motherboards, click the Display all drivers on the SOYO CD button.
SY-6BE+ Quick Start Guide Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active. Step 3. Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard.
SY-6BE+ Quick Start Guide How to contact us: n If you are interested in our products, please contact the SOYO sales department in the region you live. n If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. SOYO Taiwan SOYO USA No. 21 Wu-Kung 5 Rd.
SY-6BE+ Quick Start Guide E-Mail: support@soyo.co.uk Sales: tel: 852-27109810 fax: 852-27109078 E-mail: soyo@hkstar.com SOYO Deutschland GmbH August-Wilhelm-Kuhnholz-Str. 15 D-26135 Oldenburg Region Covered: Germany Technical Support: tel: 852-27109810 fax: 852-27109078 E-mail: soyo@hkstar.com Web Site: www.saat.de, www.soyosaat.com, www.soyo-saat.de Vertrieb Mainboards, Notebooks und SoyoCom Produkte: E-Mail: sales@soyo.
Edition: December 1999 Version 2.