Quick Start Guide The SOYO CD Quick BIOS Setup Hardware Installation SY-7IZM Motherboard Introduction
SOYO ™ SY-7IZM Motherboard Socket 370 for Intel CeleronTM processors Intel 440ZX AGP/PCI Motherboard 66&100MHz Front Side Bus supported Micro-ATX Form Factor Copyright © 1999 bySoyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies.
1 Introduction Congratulations on your purchase of the SY-7IZM Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-7IZM Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.
SY-7IZM Quick Start Guide PS/2 KB PS/2 Mouse Connector Connector JP10 1 3 WOL 1 Header 3 JP44 USB 1 USB 2 ATX Power CPUFAN 1 Socket 370 PRT COM 1 COM2 3V Lithium Battery 3 JP9 1 1 VGA FDC 1 MIC JACK CODEC CT1297 Intel 82443ZX 1 ATI RAGE PRO 1 IDE 2 IDE 1 CDIN 4 1 PCI Slot #1 DIMM 2 LINE-IN SDRAM 5 SDRAM IR1 Flash BIOS JOYSTICK LINE-OUT SDRAM I/O Chipset SDRAM Winbond 83977EF-AW DIMM 1 Introduction SY-7IZM Motherboard Layout YAMAHA 3 1 YMF740-V JP5 CMOS Clear Ju
SY-7IZM Quick Start Guide 2 Installation l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-7IZM Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-7IZM Motherboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. Hardware Installation 300MHz (66 x 4.5) 433MHz (66 x 6.5) 333MHz (66 x 5.0) 466MHz (66 x7..0) 366MHz (66 x 5.5) 500MHz (66 x7.5) 400MHz (66 x 6.
SY-7IZM Quick Start Guide Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard. Step 2. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
SY-7IZM Quick Start Guide Configure Memory Your board comes with two DIMM sockets, providing support for up to 256MB of main memory using DIMM modules from 8MB to 128MB with no restriction on memory configuration. Therefore, you can install memory modules in any combination. Step 3. Hardware Installation Memory Configuration DIMM Banks MEMORY CONFIGURATION DIMM 1 DIMM 2 RAM Type SDRAM SDRAM 8/16/32/64/128 8/16/32/64/128 RAM Module Size (MB) Step 4.
SY-7IZM Quick Start Guide Step 6. Enable/Disable Power-On by Keyboard (JP10) You can choose to enable the Power-On by Keyboard function by shorting pin 1-2 on jumper JP10; otherwise, short pin 2-3 to disable this function. JP10 Setting Enable Disable Short pin 1-2 to enable the Short pin 2-3 to disable the Power-On by Keyboard function. Power-On by Keyboard function.
SY-7IZM Quick Start Guide Note on Over-clocking Capability Hardware Installation The SY-7IZM Motherboard provides over-clocking capability. Due to the over-clocking setting your system may fail to boot up or hang during run time. If this occurs, please perform the following steps to recover your system from the abnormal situation: 1. Turn off system power.
SY-7IZM Quick Start Guide 3 Quick BIOS Setup This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program.
SY-7IZM Quick Start Guide 4 The SOYO CD Your SY-7IZM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new Motherboard, the drivers software available for installation, and a database in HTML format with information on SOYO Motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below.
SY-7IZM Quick Start Guide Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. SOYO CD Manuals Please select your manual in the box below and click OK.
SY-7IZM Quick Start Guide The following drivers are available for Windows 95 (Driver Installation Menu) The SOYO CD The following drivers are available for Windows 98 (Driver Installation Menu) However, to display the list of all drivers software available with SOYO Motherboards, click the Display all drivers on the SOYO CD button. Please make sure to install only the drivers adapted to your system, or otherwise this cause system malfunctions.
SY-7IZM Quick Start Guide A short description of all available drivers follows: Ø Intel Southbridge Drivers Because Windows 95 does not recognize the Southbridge of the newer Intel chipsets (TX, BX, ZX etc) this utility has to be run, it will update the necessary Windows files. (Only for Windows 95) Ø SOYO SpeedPro Busmaster Driver for Win 95/98 Without the busmaster drivers the CPU will need to be involved every time data is read from or written to the Harddisk.
SY-7IZM Quick Start Guide Ø YAMAHA 740 Sound Drivers for Win95/98 and Win NT With this application program the user can make use of the on board sound chip. Before installing the YAMHA 740 Sound Drivers, you MUST first install the YAMAHA 740 drivers for Windows 9x or NT. The SOYO CD Ø ATI Rage Pro AGP Select this Item and click OK to start up the ATI Rage PRO AGP driver screen. Follow the instructions on the screen to install the drivers and/or application programs you need.
SY-7IZM Quick Start Guide 2 Select the Settings page. 3 Select Display Type.... 4 Select Change... from the display options. 5 Select Have Disk... 6 NT 4.0 will prompt you for the correct path. Enter D:\driv-all\ati-pro\winnt where D: is the drive containing the SOYO CD. 7 A list of [ATI] graphics accelerators will be displayed. Select the [ATI RAGE PRO TURBO AGP 2x], then click the OK button. 8 Windows NT 4.0 will once again prompt for confirmation.
Edition: April 1999 Version 2.0 SY-7IZM SERIAL International Headquarters Soyo Computer Inc., (Taiwan) Tel: 886-2-2290-3300 Fax: 886-2-2298-3322 Web Site: http://www.soyo.com.tw E-mail: info@mail.soyo.com.tw USA Branch Office Soyo Tek Inc., (USA) Tel: (408) 452-7696 Fax: (408) 573-7696 Web Site: http://www.soyousa.com E-mail: sales@soyousa.com SOYO Europe Soyo Europe B.V., (Holland) Tel: 31-79-3637500 Fax: 31-79-3637575 Web Site: http://www.soyo-europe.com http://www.soyo.nl E-mail: Sales@soyo.
