Introduction Onboard Sound The SOYO CD Driver Installation Quick BIOS Setup Hardware Installation SY-6IEB Motherboard Quick Start Guide Tested To Comply With FCC Standards FOR HOME OR OFFICE USE C FC 100% POST CONSUMER RECYCLED PAPER
SOYO ™ SY-6IEB Motherboard Pentium ® II processor & CeleronTM processor 82440 EX/LX AGP/PCI Motherboard 66MHz Front Side Bus supported AT Form Factor Copyright © 1998 bySoyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies.
1 Introduction Congratulations on your purchase of the SY-6IEB Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6IEB Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.
SY-6IEB Quick Start Guide SY-6IEB Motherboard Layout Introduction COM 2 COM 1 1 ITE8671 I/O Chipset ISA Slot #2 ISA Slot #1 1 JP44 USB KB Connector 1 PS/2 Mouse Connector LPT JP10 1 3 FDC 1 1 ATX Power IR 1 1 1 AT Power CPUFAN 5 Slot 1 for R Pentium II Processor 3 AGP Slot SB-LINK (PC-PCI) Intel 82443 EX PCI Slot #2 PCI Slot #1 PCI Slot #3 1 Intel 82371 EB DIMM 2 _ _ SPEAKER HDD JP53 + LED 1 + Turbo Flash + LED PWRBT 1 _ Reset CHAFAN _ Key Lock BIOS DIMM 1 CMOS Clea
SY-6IEB Quick Start Guide 2 Installation l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-6IEB Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6IEB Motherboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. Hardware Installation FSB 66MHz 266MHz (66 x 4.0) 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0) 433MHz (66 x 6.
SY-6IEB Quick Start Guide Step 2. Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard. For more details on how to connect internal and external peripherals to your new SY-6IEB Motherboard, please refer to SY-6IEB Motherboard User's Guide and Technical Reference online manual on CD-ROM. Connectors and Plug-ins PCI Audio Card Header: SB-Link ™(PC-PCI) Connect the SB-Link ™(PC-PCI) cable from your PCI audio card to this header.
SY-6IEB Quick Start Guide Step 3. Configure Memory Your board comes with two DIMM sockets, providing support for up to 256MB of main memory using DIMM modules from 8MB to 128MB with no restriction on memory configuration. Therefore, you can install memory modules in any combination.
SY-6IEB Quick Start Guide Step 6. Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap. JP5 Setting Retain CMOS Data Short pin 1-2 to retain the new settings. 1 2 Clear CMOS Data 3 Short pin 2-3 for at least 5 seconds 1 2 3 to clear the CMOS.
SY-6IEB Quick Start Guide 3 Quick BIOS Setup This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main CPU parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program.
SY-6IEB Quick Start Guide 4 The SOYO CD Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below. (SOYO CD Start Up Program Menu) The SOYO CD Start Up Program automatically detects which SOYO Motherboard you own and displays the corresponding model name. Step 2. Read SOYO [6IEB] Manual Click the Read Manual button to open the user's manual file of your Motherboard.
SY-6IEB Quick Start Guide Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. 6IEB (Manual Selection Menu) The user's manual files included on the SOYO CD can be read in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system.
SY-6IEB Quick Start Guide The following drivers are available for Windows 95 Driver Installation Intel Southbridge Drivers SOYO Speedpro BusMaster Driver for win 95/98 Intel Bus Master Drivers for Win95 Intel Bus Master Drivers for Win NT Intel Bus Master Drivers for OS/2 SOYO CD Xpress utility Cancel Display all drivers on the SOYO CD OK (Driver Installation Menu) The following drivers are available for Windows 98 Driver Installation Please select the driver you want to install and click OK, You will
SY-6IEB Quick Start Guide A short description of all available drivers follows: Ø Intel Southbridge Drivers Because Windows 95 does not recognize the Southbridge of the newer Intel chipsets (TX, BX, ZX etc) this utility has to be run, it will update the necessary Windows files. (Only for Windows 95) Ø SOYO SpeedPro Busmaster Driver for Win 95/98 Without the busmaster drivers the CPU will need to be involved every time data is read from or written to the Harddisk.
SY-6IEB Quick Start Guide Step 4. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database. The Start Up program will activate the default HTML browser installed on your system (for example, Internet Explorer or Netscape) to visualize the contents of the SOYO CD. Hardware Installation The SOYO CD contains useful information about your Motherboard and other SOYO products available in as many as eleven different languages.
Edition: March 1999 Version 2.0 SY-6IEB SERIAL International Headquarters Soyo Computer Inc., (Taiwan) Tel: 886-2-2290-3300 Fax: 886-2-2298-3322 Web Site: http://www.soyo.com.tw E-mail: info@mail.soyo.com.tw USA Branch Office Soyo Tek Inc., (USA) Tel: (408) 452-7696 Fax: (408) 573-7696 Web Site: http://www.soyousa.com E-mail: sales@soyousa.com SOYO Europe Soyo Europe B.V., (Holland) Tel: 31-79-3637500 Fax: 31-79-3637575 Web Site: http://www.soyo-europe.com http://www.soyo.nl E-mail: Sales@soyo.
