SETUP: To use the monitor, please follow the steps one by one to setup the base.
Table of Contents Introduction ........................................................................ 3 Product Description .......................................................... 3 Package Contents.............................................................. 3 Product Features and Benefits .......................................... 3 Recommended Use ............................................................. 3 Cautions............................................................................
Introduction Product Description Congratulations on your purchase of this innovative monitor. Your LCD monitor incorporates high quality display into a small lightweight module. It is environment friendly because of its zero radiation emission and low power consumption. This LCD monitor utilizes 17”color active matrix thin-film transistor (TFT) liquid crystal display to provide superior display performance.
Recommended Use Read all these instructions and save them for later use. Follow all warnings and instructions on the product. Do not open or remove covers. Refer all servicing to qualified service personnel. Do not block the vent holes on the case. Do not insert sharp objects or spill liquid into the LCD monitor through slots. They may cause accidental fire, electric shock or failure. Disconnect the power plug from the AC outlet if you will not use the monitor for an indefinite period of time.
Working Environment Place the monitor on a flat and level surface. Place the monitor in a well-ventilated place. Keep the monitor away from: overly hot, cold or humid places, direct sunlight, dusty surroundings, and equipments that generate strong magnetic fields. For optimal performance, allow 1~2 minutes for warm-up. Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.
Control Function Control Button Front View 1. Auto Tuning: Automatically fixes, centers and fine-tunes the Video signal to eliminate noise and distortion. 2. OSD Menu/Select: Pressing this button will activate OSD Menu on the screen and is used to select the OSD control options on the screen. 3. Decrease: This button is used to adjust the decreasing value of the selected OSD control option. Volume select is quickly accessed when Audio is available. 4.
OSD CONTROL 7
BRIGHTNESS: Adjusts background black level of the screen image. CONTRAST: Adjusts foreground white level of the screen image. H.POSITION: Moves the screen image left or right. V.POSITION: Moves the screen up or down. PITCH: Adjusts image distortion appearing as vertical bars or noise on the screen. PHASE: Adjusts image distortion appearing as horizontal noise on the screen. SHARPNESS: Adjusts clarity and focus of the screen images. COLOR TEMPERATURE: Adjusts color temperature.
Inputs Diagram Inputs 1. LINE IN : This can be connected to the audio output from any sound resource. 2. DC POWER INPUT : This must be connected to DC power 12V/4A. 3. VGA PORT: This is to be connected to the D-Sub15 pin signal connector.
Display Angle Tilting For viewing clarity, you can tilt the LCD forward (Down to 3 degrees) or backward (Up to 30 degrees).
Product Specification Display Type 17” active matrix TFT LCD panel Pixel pitch 0.264(H)×0.
Display Modes 12
