Motherboard Quick Start Guide The SOYO CD Quick BIOS Setup Introduction Hardware Installation SY-7IWM-X
SOYO ™ SY-7IWM-X Motherboard Socket 370 for Intel Pentium ® & CeleronTM processors Intel FW82810E AGP/PCI/AMR Motherboard 66/100/133 MHz Front Side Bus supported Micro ATX Form Factor Copyright © 2000 by Soyo Computer Inc. Trademarks: Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only.
1 Introduction Congratulations on your purchase of the SY-7IWM-X Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-7IWM-X Motherboard Uses’Guide that came with your Motherboard.
Introduction SY-7IWM-X Quick Start Guide SY-7IWM-X Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector ATX Power CPUFAN 1 USB 1 USB 2 Socket 370 PRT COM1 USB 3 Intel® 5 FW82810E VGA 1 SDRAM 1 FDC 3 JP2 1 JOYSTICK SDRAM LINE-OUT 1 3 JP3 IR1 AMR 3 5 DIMM 3 WOL Header DIMM 2 JP44 MIC JACK DIMM 1 Winbond W83627HF -AW LINE-IN 1 1 IDE 2 IDE 1 1 1 4 1 J9 CD-IN Intel PCI Slot #1 82802AB 4MB CODEC AC97 Speaker 1 4 J11 PHONE-IN PCI Slot #3 JP5 1 3 CMOS Clear
Key Features Ø Ø Supports Intel ® processors - FSB 66MHz: Celeron(400-700MHz) - FSB 100MHz: Pentium® III (500850MHz) - FSB 133MHz: Pentium® III (533MHz1.13GHz) Supports 66/100/133 MHz Front Side Bus Frequency Ø Fan speed control Ø Battery Low voltage Detect Ø Support 7 sets of voltage monitoring Ø Supports multiple-boot function Ø Y2K Complaint Ø Supports Audio Modem Riser slot (AMR 1.
SY-7IWM-X Quick Start Guide 2 Installation Hardware Installation To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage.
SY-7IWM-X Quick Start Guide Install the Motherboard Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz 400MHz (66 x 6.0) 433MHz (66 x 6.5) 466MHz (66 x7.0) 500MHz (66 x7.5) 533MHz (66 x 8.0) 566MHz (66 x 8.5) 600MHz (66 x 9.0) 633MHz (66 x 9.5) 667MHz (66 x 10.0) 700MHz (66 x 10.5) FSB 100MHz 500MHz (100 x 5.0) 550MHz (100 x 5.5) 600MHz (100 x 6.0) 650MHz (100 x 6.5) 700MHz (100 x 7.0) 750MHz (100 x7.5) 800MHz (100 x 8.
SY-7IWM-X Quick Start Guide Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. Step 2. Hardware Installation The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
SY-7IWM-X Quick Start Guide Configure Memory Your board comes with three DIMM sockets, and provides support up to 512MB main memory using DIMM modules from 8MB to 256MB. Step 3. Number of Memory Modules DIMM 1 DIMM 2 1 Double-sided/ Single-sided Double-sided/ Single-sided 2 Double-sided/ Single-sided Single-sided RAM Type Memory Module Size (MB) DIMM 3 Single-sided² SDRAM¹ 8/16/32/64/256 Mbytes Note: 1. PC100 Compliant DIMM module is required regardless of 66 or 100 MHz FSB speed. 2.
SY-7IWM-X Quick Start Guide CMOS Clear (JP5) Hardware Installation In some cases the CMOS memory may contain wrong data, follow the steps below to clear CMOS memory. 1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap. 2. Then put the jumper back to 1-2 to allow writing new of data into the CMOS memory.
SY-7IWM-X Quick Start Guide 3 Quick BIOS Setup This Motherboard does not require any hardware jumpers to set the CPU operating frequency. Instead, CPU settings are software configurable through the BIOS [Frequency Control]. The [Frequency Control] menu combines the main parameters that you need to configure your system. They are all in one menu to enable a quick setup in BIOS. Step 1. Select [Standard CMOS Features] Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”. Step 2.
SY-7IWM-X Quick Start Guide The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-7IWM-X Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Step 1.
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file.
SY-7IWM-X Quick Start Guide driver revision: Intel Whitney VGA Drivers for Win 9x Intel Whitney VGA Drivers for NT 4.0 Intel .
SY-7IWM-X Quick Start Guide Ø Sigmatel Staggato Gold Application for Win 95/98/NT This application contains the wavetable that is necessary to play MIDI files. Make sure to install it after installing the Sigmatel drivers for your OS. Ø Whitney Winbond hardware doctor for win95/98 Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored.
SY-7IWM-X Quick Start Guide Quick Trouble shoot tips Video (no display) related issues I built a new computer system using a Soyo board and nothing happens when turning it on, no video and no beeps from the PC speaker. What is happening and how can it be fixed? No screen and no beeps mean that your CPU and motherboard do not work at all. It could be that the CPU is not seated correctly or that a component on the M/B is grounded (shorted) with the case.
SY-7IWM-X Quick Start Guide I get distorted video my AGP card right after I save my bios. Why is that? The cause is likely that your AGP card is not running at the correct bus speed. To fix this, please clear the CMOS via JP5 and if it still does not work, please upgrade your motherboard bios to the latest version. BIOS Issues Where can I find the BIOS revision of my mainboard? It will be displayed on the up-left corner on the screen during boot-up.
SY-7IWM-X Quick Start Guide In Device Manager, I keep getting yellow exclamation signs on my sound port even though I have installed my sound driver several times and I could not get my sound card to work. What is wrong? It is likely that you did not have the correct driver installed. If you are sure that the correct sound driver has been installed, then please install the 'south bridge' driver for the motherboard.
SY-7IWM-X Quick Start Guide How to contact us: n If you are interested in our products, please contact the SOYO sales department in the region you live. n If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. SOYO Taiwan SOYO USA 41484 Christy Street, Fremont, CA 94538 No. 21 Wu-Kung 5 Rd.
SY-7IWM-X Quick Start Guide SOYO Deutschland GmbH August-Wilhelm-Kuhnholz-Str. 15 D-26135 Oldenburg Region Covered: Germany, SOYO Hong Kong Region Covered: Hong Kong Web Site: www.soyo.com.hk Sales: Tel: 852-27109810 Fax: 852-27109078 E-mail: soyo@hkstar.com Web Site: www.saat.de, www.soyosaat.com, www.soyo-saat.de Vertrieb Mainboards, Notebooks und SoyoCom Produkte: E-mail: sales@soyo.
Edition: November 2000 Version 1.
