Introduction Onboard Sound The SOYO CD Driver Installation Quick BIOS Setup Hardware Installation SY-6IEM Mainboard Quick Start Guide Tested To Comply With FCC Standards FOR HOME OR OFFICE USE C FC 100% POST CONSUMER RECYCLED PAPER
SOYO ™ SY-6IEM Mainboard Pentium ® II & Celeron ™processors 82440 EX/LX AGP/PCI Mainboard 66MHz Front Side Bus supported Micro-ATX Form Factor Copyright © 1998 bySoyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies.
1 Introduction Congratulations on your purchase of the SY-6IEM Mainboard. This Quick Start Guide describes the steps for installing and setting up your new mainboard. This guide is designed for all users to provide the basic steps of mainboard setting and operation. For further information, please refer to SY-6IEM Mainboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your mainboard.
SY-6IEM Quick Start Guide PS/2 KB PS/2 Mouse Connector Connector DIMM 1 3 DIMM 2 FDC JP1 1 _ USB 2 Slot 1 for Pentium® II Processor USB 1 _ + + + PRT ATX Power Intel® 1 COM 1 JOYSTICK Ultra I/O Chipset LINE-IN IDE 2 5 1 IR MIC JACK 4 ESS® 1 IDE 1 3V Lithium Battery CPUFAN 4 J2 ES1898 AGP Slot CD-IN 1 1 J3 1 1 JP2 1 3 3 SB-LINK™ JP44 (PC-PCI) 1 CMOS Clear Jumper PCI Slot #1 3 JP5 Intel® 1 82371 EB PCI Slot #2 ISA Slot #1 CHAFAN 1 ISA Slot #2 Key Feature
SY-6IEM Quick Start Guide 2 Installation l Before handling the mainboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the mainboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the mainboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.
SY-6IEM Quick Start Guide Install the Mainboard Follow the steps below in order to perform the installation of your new SY-6IEM Mainboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover or write your own combination in the space provided. Hardware Installation 233MHz (66 x 3.5) 266MHz (66 x 4.0) 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.
SY-6IEM Quick Start Guide Step 2. Make Connections to the Mainboard This section tells how to connect internal peripherals and power supply to the mainboard. For more details on how to connect internal and external peripherals to your new SY-6IEM Mainboard, please refer to SY-6IEM Mainboard User's Guide and Technical Reference online manual on CD-ROM. Connectors and Plug-ins PCI Audio Card Header: SB-Link ™ (PC-PCI) Connect the SB-Link ™(PC-PCI) cable from your PCI audio card to this header.
SY-6IEM Quick Start Guide Step 3. Configure Memory Your board comes with two DIMM sockets, providing support for up to 256MB of main memory using DIMM modules from 8MB to 128MB with no restriction on memory configuration. Therefore, you can install memory modules in any combination.
SY-6IEM Quick Start Guide Step 6. Enable/Disable Onboard Sound (JP2) l Short pin 2-3 on jumper JP2 to enable the onboard sound function. Then, you can plug your external audio devices such as amplified-speakers, CD-player, and microphone to the mainboard Line-out, Line-in and Mic ports right after the mainboard is installed. (You do not need to install any sound card.) l To disable the onboard sound options short pin 1-2 on jumper JP2. Onboard Sound JP2 Setting Step 7.
SY-6IEM Quick Start Guide 3 Quick BIOS Setup This mainboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main CPU parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program.
SY-6IEM Quick Start Guide 4 The SOYO CD Your SY-6IEM Mainboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new mainboard, the drivers software available for installation, and a database in HTML format with information on SOYO mainboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below.
SY-6IEM Quick Start Guide Please note that if the Start Up program was unable to determine which SOYO mainboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your mainboard model name and click OK. 6IEM (Manual Selection Menu) The SOYO CD The user's manual files included on the SOYO CD can be read in PDF (Postscript Document) format.
SY-6IEM Quick Start Guide The following drivers are available for Windows 95 (Driver Installation Menu) The SOYO CD The following drivers are available for Windows 98 (Driver Installation Menu) 13
SY-6IEM Quick Start Guide Select which driver you want to install and click OK, or click Cancel to abort the driver installation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active. Step 4. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database.
SY-6IEM Quick Start Guide 5 Onboard Sound Driver Installation Windows® 98 Users If you are using the Windows® 98 operating system, skip this section. You do not need to install the sound driver since Windows® 98 O/S, which already contains the ESS audio driver, can detect and accommodate the ESS sound chip installed on this mainboard. Windows® 95 Users Introduction This section describes how to install the ESS ™ audio driver for Microsoft Windows® 95 environment.
SY-6IEM Quick Start Guide Windows® 95 Sound-Driver Installation This section describes how to perform the ESS ™ audio driver installation in Windows® 95 environment. After first installing Windows® 95, follow these steps: 1. From the desktop, click [Start] menu and select [Control Panel] from [Settings] group. 2. Select the [System] icon. 3.
SY-6IEM Quick Start Guide ESSCFG.EXE and ESSVOL.EXE The installation of the driver will also install three files into the window’s directory: ESSCFG.EXE, ESSVOL.EXE and ESSCFG.INI, ESSCFG.EXE, configures AudioDrive chips to make them game-ready in DOS. ESSCFG.INI stores all the potential settings available to your hardware ESSVOL.EXE sets the default mixer volume levels. The following lines are also added to the AUTOEXEC.BAT by the driver installation program: C:\WINDOWS\ESSCFG.
Edition: August 1998 Version 1.0 6IEM SERIAL International Headquarters Soyo Computer Inc., (Taiwan) Tel: 886-2-2290-3300 Fax: 886-2-2298-3322 Web Site: http://www.soyo.com.tw E-mail: info@mail.soyo.com.tw USA Branch Office Soyo Tek Inc., (USA) Tel: (408) 452-7696 Fax: (408) 573-7696 Web Site: http://www.soyousa.com E-mail: sales@soyousa.com SOYO Europe Soyo Europe B.V., (Holland) Tel: 31-79-3637500 Fax: 31-79-3637575 Web Site: http://www.soyo-europe.com http://www.soyo.nl E-mail: Sales@soyo.
