Replacement Part List

ManualsBrandsSouthland ManualsGas Leaf Blowers170 MPH 520 CFM 43 cc Gas Wheeled Outdoor Blower

MAT Engine Technologies, LLC, REV. 20190524 A204172

ILLUSTRATED PARTS BOOK

43cc Walk Behind Blower

SWB43170

Summary of content (21 pages)

PAGE 1
ILLUSTRATED PARTS BOOK 43cc Walk Behind Blower SWB43170 MAT Engine Technologies, LLC, REV.
PAGE 2
Table of Contents Unit Assembly…………………………................................................................................................. 2 Engine-Top Level................................................................................................................................ 3 Handle Assembly............................................................................................................................... 4 Lower Weldment Assembly.......................................................
PAGE 3
Unit Assembly REF. NO. 1 2 3 4 DESCRIPTION Engine-Top Level Handle Assembly Lower Weldment Assembly Blower Assembly MAT Engine Technologies, LLC, REV. 20190524 -2- PART NO.
PAGE 4
Engine-Top Level REF. NO. DESCRIPTION PART NO. QTY 1 2 Engine, 43cc Screw, M6 x 1.0 x 35, SHCS, Grade 8.8 A203550 Reference Only 1 4 MAT Engine Technologies, LLC, REV.
PAGE 5
Handle Assembly REF. NO. 1 2 3 4 5 6 7 DESCRIPTION Handle, Upper Handle, Middle Kit, Throttle Assembly Screw, M6 x 35, Hex Flange Nut, M6, Hex Lock Bolt, M8 x 1.25 x 65, Round Head Square Neck Knob, Handle MAT Engine Technologies, LLC, REV. 20190524 -4- PART NO.
PAGE 6
Lower Weldment Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 DESCRIPTION Weldment, Lower Frame Assembly, Wheel - RH Assembly, Wheel - LH Bolt, M10 x 1.5 x 20, HFH, Grade 8.8 Washer, Wheel Flap, Guard Bolt, M6 x 1.0 x 16, HFH, Grade 8.8 Nut, M6 x 1.0 Chain, Single Jack, Trade size 12 Screw, 6.3 x 1.8 x 13, Type F, HFH Tapping Kit, Chain (includes 9 & 10) MAT Engine Technologies, LLC, REV. 20190524 -5- PART NO.
PAGE 7
Blower Assembly REF. NO. 1 2 3 4 DESCRIPTION Assembly, Wheel Assembly, Fan Housing Assembly, Drive Assembly, Nozzle MAT Engine Technologies, LLC, REV. 20190524 -6- PART NO.
PAGE 8
Wheel Assembly REF. NO. 1 2 3 4 5 6 7 8 9 DESCRIPTION Cap, Retainer Flat Washer, 13 x 28 x 2.5mm Bearing, Wheel Wheel, 7” Rod, Caster Wheel Bushing, Caster Wheel Rod (kit includes two bushings) Bracket, Caster, Southland Red Kit, Wheel (includes two wheel bearings) Kit, Retainer Cap (includes two flat washers) MAT Engine Technologies, LLC, REV. 20190524 -7- PART NO.
PAGE 9
Fan Housing Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 DESCRIPTION Screw, Plastic Thread Forming Grille, Intake Lock Nut, M6 x 1.0, Hex Nylon Insert Housing, Front Screw, M6 x 1.0 x 20, Torx Drive Cap, Fan Nut, M8 x 1.25, HFH Serrated Flat Washer, 8.3 x 22 x 2mm Arbor, PM Fan Flat Washer, 8.1 x 28 x 3mm Housing, Rear Kit, Fan (includes PM arbor, two flat washers, and nut) MAT Engine Technologies, LLC, REV. 20190524 -8- PART NO.
PAGE 10
Drive Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DESCRIPTION Screw, M5 x 0.8 x 25, Button Head Cap Housing, Bearing Screw, M6 x 1.0 x 25, SHCS Lock Washer, M6 Flat Washer, M6 Lock Nut, M6 x 1.0, Hex Nylon Insert Screw, M5 x 0.8 x 12, SHCS Lock Washer, M5 Flat Washer, M5 Spacer Bearing Ring, Retaining Assembly, Drive Shaft and Tube Kit, Drive Assembly Upper Drive Housing Assembly Screw, M6 x 1.0 x 12, SHCS MAT Engine Technologies, LLC, REV. 20190524 -9- PART NO.
PAGE 11
Nozzle Assembly REF. NO. 1 2 3 4 5 6 7 DESCRIPTION Screw, Thumb Nut, M5 x 0.8, Hex Nylon Insert Screw, Plastic Thread Forming Nozzle, Upper Half Nozzle, Lower Half Kit, Thumb Screw and Nut Kit, Outlet Nozzle (includes three screws) MAT Engine Technologies, LLC, REV. 20190524 - 10 - PART NO.
PAGE 12
Air Filter Assembly REF. NO. DESCRIPTION PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Housing, Air Filter Bracket, Air Filter Mounting Plate, Choke Screw, M5 x 0.8 x 55, SHCS, Grade 8.8 Flat Washer, M5 Lock Washer, M5 Filter, Pleated Mounting Plate, Air Filter Filter, Foam Element O-Ring, 3.15 x 1.
PAGE 13
Carburetor Assembly DESCRIPTION REF. NO. 1 2 Carburetor Primer Bulb MAT Engine Technologies, LLC, REV. 20190524 - 12 - PART NO.
PAGE 14
Muffler Assembly REF. NO. DESCRIPTION PART NO. QTY 1 Muffler For Reference Only 1 2 Bolt M5x10 For Reference Only 1 3 Nut M6 For Reference Only 2 4 Cover, Muffler A200844 1 5 Bolt M5x12 For Reference Only 1 6 Bolt M5x25 For Reference Only 1 7 Label, Hot For Reference Only 1 8 Gasket, Muffler A201107 1 9 Muffler Assembly (Includes items #1-8) A200775 1 MAT Engine Technologies, LLC, REV.
PAGE 15
Fuel Tank Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 DESCRIPTION PART NO. QTY Tank, Fuel Screw, M5 x 0.8 x 18, SHCS, Grade 8.8 Lock Washer, M5 Flat Washer, M5 Fuel Line 1 Fuel Line 2 Seal, Fuel Lines Filter, Fuel Cap, Fuel Kit, Fuel Line/Filter (Includes items #5-8) A203640 Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only A200781 A203641 1 4 4 4 1 1 1 1 1 1 MAT Engine Technologies, LLC, REV.
PAGE 16
Clutch Assembly REF. NO. 1 2 3 4 5 6 7 8 DESCRIPTION PART NO. QTY Flat Washer, M8 Clutch Shoes and Spring Wave Spring Washer, M8 Bolt, M8 x 1.25 x 24, Hex Head Shoulder Pin Cover, Flywheel Screw, M5 x 0.8 x 23, PHPD Assembly, Clutch Reference Only Reference Only Reference Only Reference Only Reference Only A203679 Reference Only A200782 2 1 2 2 2 1 4 1 MAT Engine Technologies, LLC, REV.
PAGE 17
Recoil Starter Assembly REF. NO. 1 2 2-1 2-2 3 4 5 5-1 5-2 5-3 5-4 DESCRIPTION Screw, M5 x 0.8 x 20, PHPD Recoil Starter Recoil Handle, Recoil Starter Gasket, Recoil Starter Nut, M8 x 1.25 Assembly, Starter Pawl Ratchet, Starting Spring, Returning Base, Starting Ratchet Clip MAT Engine Technologies, LLC, REV. 20190524 - 16 - PART NO.
PAGE 18
Cylinder Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 DESCRIPTION PART NO. QTY Stud, M6 x 1.0 x 63 Gasket, Muffler Cylinder Spark Plug Screw, M5 x 0.8 x 20, SHCS, Grade 8.8 Gasket, Cylinder Gasket, Isolator Assembly, Carburetor Isolator Flat Washer, M5 Lock Washer, M5 Screw, M5 x 0.8 x 25, SHCS, Grade 8.
PAGE 19
Ignition Assembly REF. NO. 1 2 3 4 5 6 DESCRIPTION PART NO. QTY Flywheel Ignition Module Flat Washer, M5 Lock Washer, M5 Screw, M5 x 0.8 x 20, SHCS, Grade 8.8 Wire Harness A202704 A202703 Reference Only Reference Only Reference Only A203729 1 1 2 2 2 1 MAT Engine Technologies, LLC, REV.
PAGE 20
Air Cooling Assembly REF. NO. 1 2 2-1 2-2 3 DESCRIPTION Screw, M5 x 0.8 x 16, PHPD Assembly, Air Cover Cover, Cylinder Cover, Air Cooling Screw, M5 x 0.8 x 23, PHPD MAT Engine Technologies, LLC, REV. 20190524 - 19 - PART NO.
PAGE 21
Decal Kit DESCRIPTION REF. NO. Decal Kit MAT Engine Technologies, LLC, REV. 20190524 - 20 - PART NO.