Manual

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: [phone]
Revised 3/09
1051P PNEUMATICALLY
OPERATED DEADLATCH
STANDARD FEATURES:
• Deadlock indication switch
• Mechanical latchback
• Six tumbler lock
• Plug connector
• Solenoid valve
• Fail secure
• Mounting fasteners
• Mechanical key holdback
• Adjustable roller bolt
OPTIONAL FEATURES:
NO LATCHBACK - Latchbolt
remains retracted as long as
control switch is activated.
Latchbolt extends when power is
removed. Specify “NL.”
EMERGENCY EXIT
DOOR HOLDBACK -
Deadbolt retracted by solenoid or
by key, extended by key only
(no snaplatch feature). When
deadbolt is extended, lock is
deadlocked. Specify “EED.” UL
listing not available with
this function.
EMERGENCY EXIT RELEASE -
From remote location latchbolt can
be retracted and held retracted
until released from remote station.
Requires a second pneumatic tube
to the lock and an emergency
reserve air system. Specify “EER.”
UL listing not available with
this function.
TECHNICAL DATA:
• STANDARD FINISH:
Galvanized
• COVER: 3/16" steel plate
• CASE: 3/16" steel plate
•LATCHBOLT:
Cold-rolled steel
DEADLOCK ACTUATOR:
Stainless steel
• PARACENTRIC
CYLINDER:
Silicon bronze/copper alloy
• TUMBLERS: Spring tempered
brass. Tumblers actuated by
phosphor bronze springs, six
tumblers per lock
• ELECTRICAL: 24 VDC,
1.5 watt continuous duty
• AIR REQUIREMENT:
Consumption: 1.1 cubic inches
per operation.
Supply pressure:
80-100 P.S.I. at the door.
• LOCK SIZE:
13-3/8" H x 9" W x 3-1/8" D
• LOCK WEIGHT: 50 lbs.
• LATCHBOLT SIZE:
2" H x 3/4" TK
• LATCHBOLT THROW: 1"
• ASTM F 1577 Certified
Impact Test-Grade 1
* Indicates lock mounting/access plate side.
C2
Door Preparation
Frame Preparation
NOTE:
Drawing for illustration only. Reference template
for specific Information.
Swing Chart: Specify circled swing number when ordering.
P N E U M A T I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Maximum security.
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 38