Instructions / Assembly

Figure 7
TIGHTEN CAM-BOLTS (3) INTO
PREDRILLED HOLES ON UPSIDE
OF BASE (N) AND FIT INTO
CORRESPONDING HOLES ON
BOTTOM EDGES OF PARTS
(I,J,L,M). INSERT CAM-LOCKS(4)
INTO BIG HOLE ON
PARTS(I,J,L,M) WITH SLOT FOR
SCREWDRIVER FACING
OUTWARD.ROTATE CAM-LOCKS
(4) CLOCKWISE TO SECURE
CAM-BOLTS(3).PUSH COVERS (5)
INTO CAM-LOCKS(4).ASSEMBLE
LOWER SHELF(K) IN SAME
MANNER.AS SHOWN IN FIGURE
7.
Figure 8
INSERT FLAT HEAD SHORT SCREW (6)
THROUGH MAGNET PLATE (8) AND TIGHTEN
INTO PREDRILLED HOLE ON LOWER DOOR (O).
INSERT FLAT HEAD SHORT SCREWS(6)
THROUGH METAL PLATE(10) AND TIGHTEN
INTO PREDRILLED HOLES ON LOWER
DOOR(O) .INSERT SMALL MACHINE SCREW(9)
THROUGH PREDRILLED HOLES ON LOWER
DOOR(O),METAL PLATE (10) AND TIGHTEN
INTO HANDLE(11).
INSERT FLAT HEAD SHORT SCREWS(6)
THROUGH THE HOLES ON HINGES(7) AND
FIGHTEN INTO PREDRILLED HOLES ON EDGES
OF LOWER RIGHT SIDE PANEL(L) AND LOWER
DOOR(O).INSERT ROUND HEAD SCREWS(12)
THROUGH END OF MAGNET(13) AND TIGHTEN
INTO PREDRILLED HOLES ON UNDERSIDE OF
LOWER SHELF(K)。AS SHOWN IN FIGURE8.
Figure 9
PLEASE BE CAREFULLY ATTACH
SMALL BACK MIRROR(R) INTO
GROOVES OF
PARTS(I,J,K,L,M,N),AND ATTACH
LOWER BACK PANELS(P) INTO
SLOTS OF REAR EDGES OF
PARTS(I,J,K,L,M,N).INSERT
ROUND HEADSCREWS(12)
THROUGH PREDRILLED HOLES
ON LOWER BACK PANELS(P) AND
TIGHTEN INTO CORRESPONDING
HOLES ON REAR EDGES OF
PARTS(I,J,K,L,M,N).AS SHOWN
IN FIGURE 9.
LIGHTED CORNER CURIO
Assembly Instructions