Instructions / Assembly

Figure 4
INSERT FLAT HEAD SHORT SCREW (6)
THROUGH MAGNET PLATE (8) AND
TIGHTEN INTO PREDRILLED HOLE ON
UPPER DOOR (G). INSERT FLAT HEAD
SHORT SCREWS (6) THROUGH METAL
PLATE (10) AND TIGHTEN INTO
PREDRILLED HOLES ON UPPER DOOR
(G). INSERT SMALL MACHINE SCREW
(9) THROUGH PREDRILLED HOLES ON
UPPER DOOR (G), METAL PLATE (10)
AND TIGHTEN INTO HANDLE (11).
INSERT FLAT HEAD SHORT SCREWS (6)
THROUGH THE HOLES ON HINGES (7)
AND TIGHTEN INTO PREDRILLED
HOLES ON EDGES OF UPPER RIGHT
SIDE PANEL (D) AND UPPER DOOR (G).
INSERT ROUND HEAD SCREWS (12)
THROUGH END OF MAGNET (13) AND
TIGHTEN INTO PREDRILLED HOLES ON
UNDERSIDE OF TOP PANEL (C). AS
SHOWN IN FIGURE 4.
Figure 5
PLEASE BE CAREFULLY ATTACH
LARGE BACK MIRRORS (Q) INTO
GROOVES OF PARTS (A, B, C, D,
E, F), AND ATTACH UPPER BACK
PANELS (H) INTO SLOTS OF REAR
EDGES OF PARTS (A, B, C, D, E,
F). INSERT ROUND HEADSCREWS
(12) THROUGH PREDRILLED
HOLES ON UPPER BACK PANELS
(H) AND TIGHTEN INTO
CORRESPONDING HOLES ON
REAR EDGES OF PARTS (A, B, C,
D, E, F). AS SHOWN IN FIGURE 5.
Figure 6
I
NSERT WOOD DOWELS(2) INTO
PREDRILLED HOLES ON EDGE OF
LOWER LEFT BACK RAIL(J) AND FIT
INTO CORRESPONDING HOLES IN
LOWER RIGHT BACK RAIL(I).INSERT
FLAT HEAD LONG SCREWS(1)
THROUGH PREDRILLED HOLES ON
LOWER RIGHT BACK RAIL(I) AND
TIGHTEN INTO CORRESPONDING
HOLES ON LOWER LEFT BACK
RAIL(J).AS SHOWN IN FIGURE(6).
LIGHTED CORNER CURIO
Assembly Instructions
G
A
7
G
10
11
6
6
13
12