Product Sheet

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
[phone] www.southbendnc.com
Models:
FRONT VIEW
REAR VIEW
TOP VIEW
40-1/4"
(1023)
22-5/8”
(575)
60"
(1524)
41"
(1041)
72"
(1829)
5" Flue Riser
24" Flue Riser
36" Flue Riser
8-1/2" (216)
SIDE VIEW of MODULAR MODEL
SIDE VIEW
33-3/4"
(859)
15-3/4"
(400)
36"
(914)
37-1/2"
(953)
11-1/4"
(286)
37-1/2" (953)
34" (864)
40" (1016)
43-1/2" (1105)
5" (127)
Front Gas
Manifold
20-1/2"
(521)
10"
(298)
Optional extra-deep flue riser (cooking area is
same as for models with standard flue riser).
Optional Shelf
32" (813)
2-1/2" (64)
18"
(457)
Electrical
Connection
for Oven
Models
20"
(508)
Rear Gas
Connection
25-3/4" (654)
1-3/8"
(35)
*(+/- 1” tolerance)
6" (152)*
Motor for
Convection
Oven Models
  P32N-PPP  P32C-PPP  P32D-PPP  P32A-PPP
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
OPTIONS and ACCESSORIES
MISCELLANEOUS
UTILITY INFORMATION
GAS: Each unit has a
1-1/4"frontmanifoldthat
couplestotheadjacent
sectional unit(s), and a
1"reargasconnection
withamaleNPT
connector.Minimumgas
supplypressureis7"
W.C.fornaturalgasand
11"W.C.forpropane.
All sectional units
requirearegulatedgassupply(apressureregulatormustbeordered
separately).Ifusingaexible-hosegasconnection,theinside
diameter of the hose must not be smaller than the connector on
theunitandmustcomplywithANSIZ21.69,providinganadequate
meansofrestrainttopreventunduestrainonthegasconnection.
ELECTRICITY: Convectionovenmodelswithoptionalelectronic
ignitionrequire50Hzor60Hzsingle-phasepower.120Vmodels
havea7-footpowercordwithgroundplug(5.9Afor"A"models).
208/240Vmodelshaveaterminalblockforconnectiontoasingle-
phase208/240Vsource(2.7Afor"A"models).
• Ifcastersareusedwithaexible-hosegasconnection,a
restrainingdeviceshouldbeusedtopreventunduestrain
on the hose.
• Minimumclearancefromnoncombustibleconstructionis
zero(excepttheremustbe2"clearancebehindtheblower
motor of convection-oven models). Minimum clearance
fromcombustibleconstructionis10"(254mm)onsides
and12"(305mm)onrear.
• Installationunderaventedhoodisrecommended.
• Checklocalcodesforreandsanitaryregulations.
NOTICE:Southbendhasapolicyofcontinuousproductresearch
andimprovement.Wereservetherighttochangespecicationsand
productdesignwithoutnotice.Suchrevisionsdonotentitlethebuyer
tocorrespondingchanges,improvements,additionsorreplacements
forpreviouslypurchasedequipment.
 Externalpressureregulator
 Frontrailoptions:
Cutoutsinfrontrailforsaucepans
7-1/4"deepfrontrail(tomatchold
stylesectional)
Squarebellybarmountedon7-1/4"
deepfrontrail
 Casters (front two casters lock)
 Cable restraint kit (to restrict
movement when on casters)
 24"or36"highueriser
Shelvesonueriser(oneon24"ue
riser,oneortwoon36"ueriser,10"
deep)
 Trayortubularshelving(12"deep)
 Open-framebasewithcastersfor
battery
 Extra-deeprear-extendingueriser
 Stainless steel oven interior
 Salamander or cheesemelter mounted
on36"ueriser
 Removableshelfinsidecabinet
 Electronicovenpilotignition(nocharge)
FormP32-PPPRev3(January/2016)
Dimensions shown in inches and (millimeters)
Shipping Crate DimenSionS & Weight
moDel
WiDth height Depth Volume Weight
P32N-PPP
39"
(991)
21"
(533)
44"
(1118)
20.9cuft
(0.59cum)
400lbs
(181.4kg)
P32C-PPP
39"
(991)
42.5"
(1080)
44"
(1118)
42.2cuft
(1.19cum)
560lbs
(254.0kg)
P32D-PPP
39"
(991)
42.5"
(1080)
44"
(1118)
42.2cuft
(1.19cum)
700lbs
(317.5kg)
P32A-PPP
39"
(991)
42.5"
(1080)
44"
(1118)
42.2cuft
(1.19cum)
740lbs
(335.7kg)
moDel
gaS (Btu/hour) eleCtriCity (ampS)
natural propane 120V 208/240V
P32N-PPP 48,000 46,500 - -
P32C-PPP 48,000 46,500 - -
P32D-PPP 93,000 91,500 0* 0*
P32A-PPP 93,000 91,500 5.9* 2.7*
*StandingOvenPilotModels
Solid shelving
has a depth of
10".
Tubed and Tray
shelving have a
depth of 11-1/8".