Product Sheet

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
[phone] www.southbendnc.com
Models:
REAR VIEW
6" (152)
FRONT VIEW
16" (406)
37-1/2"
(953)
24"
(610)
60"
(1524)
41"
(1041)
72"
(1829)
5" Flue Riser
24" Flue Riser
36" Flue Riser
36"
(914)
TOP VIEW
20"
(508)
Rear Gas
Connection
SIDE VIEW
37-1/2" (953)
34" (864)
40" (1016)
43-1/2" (1105)
12-3/4"
(324)
33-3/4"
(857)
5" (127)
8-1/2" (216)
SIDE VIEW of MODULAR MODEL
Front Gas
Manifold
9-1/4"
(235)
20-1/2"
(521)
10"
(254)
Optional extra-deep flue riser (cooking area is
same as for models with standard flue riser).
Optional
Shelf
*(+/- 1” tolerance)
 P16N-X  P16C-X
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
OPTIONS and ACCESSORIES
MISCELLANEOUS
UTILITY INFORMATION
GAS: Each unit has a 1-1/4" front manifold that couples to the
adjacent sectional unit(s), and a 1" rear gas connection with a male
NPT connector. Minimum gas supply pressure is 7" W.C. for natural
gas and 11" W.C. for propane. All sectional units require a regulated
gas supply (a pressure regulator must be ordered separately). If
usingaexible-hosegasconnection,theinsidediameterofthehose
must not be smaller than the connector on the unit and must comply
with ANSI Z21.69, providing an adequate means of restraint to
prevent undue strain on the gas connection.
• Ifcastersareusedwithaexible-hosegasconnection,a
restraining device should be used to prevent undue strain
on the hose.
• Minimum clearance from noncombustible construction is
zero. Minimum clearance from combustible construction is
13" (330 mm) on sides and 6" (152 mm) on rear.
• Installation under a vented hood is recommended.
• Checklocalcodesforreandsanitaryregulations.
NOTICE:
Southbend has a policy of continuous product research and
improvement.Wereservetherighttochangespecicationsand
product design without notice. Such revisions do not entitle the buyer
to corresponding changes, improvements, additions or replacements
for previously purchased equipment.
 External pressure regulator
 Front rail options:
 Cutouts in front rail for sauce pans
 7-1/4" deep front rail (to match old
style sectional)
 Square belly bar mounted on
7-1/4" deep front rail
 Casters (front two casters lock)
 Cable restraint kit (to restrict
movement when on casters)
24"or36"highueriser
Shelvesonueriser(oneon24"ue
riser,oneortwoon36"ueriser,10"
deep)
 Tray or tubular shelves (12" deep)
 Open-frame base with casters for
battery
Extra-deeprear-extendingueriser
 Removable shelf inside cabinet
 Removable, cast iron grate top
 Battery spark ingition
Form P16-X Rev 10 (April/2014)
Dimensions shown in inches and (millimeters)
Model
Gas (BTU/hoUr)
NaTUral ProPaNe
P16N-X 90,000 90,000
P16C-X 90,000 90,000
shiPPiNG CraTe diMeNsioNs & WeiGhT
Model
WidTh heiGhT dePTh VolUMe WeiGhT
P16N-X
20"
(508)
21"
(533)
42.5"
(1080)
10.3 cu ft
(0.29 cu m)
150 lbs
(68.0 kg)
P16C-X
20"
(508)
45"
(1143)
42.5"
(1080)
22.1 cu ft
(0.63 cu m)
220 lbs
(99.8 kg)
Solid shelving has
a depth of 10".
Tubed and Tray
shelving have a
depth of 11-1/8".