Measurement Guide

ManualsBrandsSouth Main Hardware ManualsCabinet Hardware20 in. White Coated Stainless Steel Euro Bottom Mount Drawer Slides

STOP: Please carefully READ instruction manual

before beginning your installation.

INSTRUCTION MANUAL

SLIDE-R

European Bottom Mount Drawer Slides

Product Specifications:

Premium bottom mounting euro drawer slides with white powder coat finish.

55-Lbs max weight capacity; made from cold rolled steel and nylon track wheels.

Thickness: 1.2mm; Width: 0.88 inch (22.4mm).

Recommended side clearance: 1/2 inch (12.7mm).

Recommended clearance for bottom of drawer: 1/4 inch (6.4mm).

Recommended clearance for top of drawer: 5/8 inch (16mm).

This item is available in the following lengths: 10”, 12”, 14”, 16”, 18”, 20”, and

22” and 24”.

Recommended Tools:

Phillips screwdriver

Tape Measure

Pencil

Level

1/2”

(12.7mm)

1/4” (6.4mm)

Min.

5/8” (16mm)

Min.

NOTICE: These slides are for frameless cabinets. Face-frame cabinets will require a face-frame kit.

Summary of content (5 pages)

PAGE 1
STOP: Please carefully READ instruction manual before beginning your installation. INSTRUCTION MANUAL SLIDE-R European Bottom Mount Drawer Slides NOTICE: These slides are for frameless cabinets. Face-frame cabinets will require a face-frame kit. Product Specifications: Premium bottom mounting euro drawer slides with white powder coat finish. 55-Lbs max weight capacity; made from cold rolled steel and nylon track wheels. Thickness: 1.2mm; Width: 0.88 inch (22.4mm).
PAGE 2
What’s included: (A) One (1) Left-Side Cabinet Member (CL) (B) One (1) Left-Side Drawer Member (C) One (1) Right-Side Cabinet Member (D) One (1) Right-Side Drawer Member (DR) (E) Twelve (12) #5 ½” Flat Head Wood Screws B C #5 x 1/2” Flat Head Wood Screws x12 E A DR CL D Installation Guide: Step 1: Install Bottom Drawer Members Place the drawer member (D) onto the bottom of the drawer. Secure with the provided screws. Repeat this step with drawer member (B) on the opposite side of drawer.
PAGE 3
Step 2: Determining Drawer Position 1. Align drawer to desired location. Mark a line on the cabinet at the bottom of the drawer face on both sides. 2. Slide the cabinet member (C) onto the drawer member (D). 3. Once attached, measure the distance between the bottom of the drawer front to the top of the cabinet member (C) Write down this measurement “X”. x © 2016 South Main Hardware | www.southmainhardware.com | 1-866-496-8030 | Info@southmainhardware.
PAGE 4
Step 3: Installing Cabinet Members 1. Locate the cabinet line drawn in the previous step. 2. Measure distance “X” from the previous mark. Draw a line inside the cabinet wall to mark this distance. x 3. Align the top of cabinet member (C) with the marked line. 4. IMPORTANT: Make sure that cabinet member (C) is 1/8” (3.3mm) from the front of the cabinet. 1/8” (3.3mm) 5. Using a level, ensure cabinet member (C) is level and secure to the wall using the provided screws. C E x3 6.
PAGE 5
Step 4: Connecting your Drawer To attach your drawer to the cabinet, tilt drawer upwards and align with cabinet slides before pushing in. Test drawer to ensure proper installation. Enjoy! © 2016 South Main Hardware | www.southmainhardware.com | 1-866-496-8030 | Info@southmainhardware.