Instruction Manual

unlocking symbol and the arrow, rotate the skirt in clockwise direction
until you can see the arrow and locking symbol are
in the same horizontal position.Be cautious with the stainless steel
propeller when it crosses over the hole of the stainless steel skirt.
Uninstall the skirt
Hold and press the clamp,rotate the skirt in
anticlockwise direction to take off the skirt. Be cautious
with the stainless steel propeller in case it hits the
stainless steel skirt.
Maintenance (skirt/pump)
Turn the pump cap out of the lock position then pull
off.
The skirt and pump cap can be placed into the dishwasher.
Maintenance (cleaning)
CLEANING THE CIRCULATOR
For cleaning the heating coil, pump shaft, and sensors,
use dish soap, a soft tooth brush and rinse under water. Do not rinse the
top part of the circulator including the main body in water.