Datasheet

87
SMS – Qikmate
Accessories for standard Qikmate connectors
Pin protection shroud for panel mount receptacle (SMS--CSB1)
When pins are inserted into the panelmount
receptacle half (SMS--R1) of the QIKMATE
connector, an optional pin protection
shroud can be installed.
The shroud is mounted at the same time
as the receptacle by holding the shroud
against the mating side of the panel with
both cutouts lined up. The receptacle is
then inserted in place, trapping the shroud
between the receptacle and panel. The use
of the pin protection shroud reduces the
allowable thickness of the panel from 2.3 to
1.6 mm max.
Strain relief hoods
(SMS—H1)
Part number Number of contact A B
positions
SMS2CSB1 2 19.8
SMS3CSB1 3 23.4 18.8
SMS4CSB1 4 28.4
SMS6CSB1 6 23.9
SMS9CSB1 9 29.0
S M S 12 C S B 1 12 23.4 34.0
SMS15CSB1 15 39.1
SMS18CSB1 18 44.2
SMS24CSB1 24 28.4
SMS36CSB1 36 54.1 34.0
Discrimination pins
For discrimination pins on both standard Qikmate and Qikmate Pin Headers cable and boardmount:
See accessories section.
Separate strain relief hoods are available for all standard plugs SMS—P1.
The hoods consist of identical halves that snap into position on the plug and are secured in
place with the cable tie drawn tightly around the cabe entry collar.
Catalog numbers designate a complete hood (2 halves) SMS—H1
The cable tie is not included (TF4D – TF5D)
Two three and four position hoods are single piece units