Datasheet

2
UTL series
The philosophy of the UTL series is built around three key elements:
Dynamic IP68/69K UV Resistant UL/IEC Compliant
In most applications, our connectors are
exposed to extreme climatic conditions;
it was therefore key for us to select the
materials best able to cope with the
targeted environment.
In most applications, our connectors are
exposed to extreme climatic conditions;
it was therefore key for us to select the
materials best able to cope with the targeted
environment.
The UTL series uses an outdoor rated
material. Underwriters Laboratories classifies
it "F1".
The outmost priority for any electrical
installation is to protect personnel from any
shock hazard.
In North America, Underwriters Laboratories
insisted that connector manufacturers,
depending of the application, respect their
standards. The UTL series had thus been
qualified, certified by this organisation and
compliant with the UL 1598.
In Europe and in Asia, IEC standards are
better known and trusted by end users. Like
its American equivalent, the IEC refers to
safety rules. The UTL series was obviously
designed to respect these rules and
especially the IEC 60598.
UTL series is rated at IP68/69K… even
in dynamic conditions. This means
that it remain sealed even when used
continuously underwater or cleaned using
a high pressure hose and cable is moving.
If this same level of performance is required
even when connectors then we have special
sealed contacts. This unique fetaure helps
you to product your electronics from ingress
of water. This is particulary insteresting when
using with NEMA enclosure or outdoor
luminaires.