User's Manual

4
1. Posion your completed mantel close to its final locaon. Make sure you can access the back of the mantel as
your electric fireplace insert will be install from the back.
2. Place a piece of cardboard or protecve sheet on the floor in order to avoid scratching the decorave surface of
your mantel during assembly. Please DO NOT fully ghten the KD screws unl all panels are assembled.
3. The fireplace insert can be installed aer the mantel has been fully assembled.
WARNING: Make sure the fireplace insert controls are in the OFF posion and the unit is NOT plugged in.
CAUTION - High temperature, risk of fire, keep electrical cords, drapery, furnishings, and other combusbles at
least 3 feet (0.9 m) from the front of the heater and away from the side and rear.
To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the
heater.
INSTALLATION INSTRUCTION
INSTALLATION
Rear view of fireplace
ELECTRIC
FI
REPLACE
INSERT