User's Manual

8
CARE AND MAINTENACE
Replacing the Remote Control Battery
When the remote control stops operang or its range seems reduced, it is me to replace the baeries.
Note: The baeries should be removed if the product is to be le unused for a long me.
Caution: Non-rechargeable baery is not to be recharged. Exhausted baery is to be removed from the product.
1. The baery compartment is located on the back end of the remote control.
2. Press the small tab inward as you slide the baery door open and remove the old baery.
3. Insert a new CR2025 lithium baery (not included), ensuring the polaries of the baery match the inside of the
baery compartment.
4. Re-insert the baery door.
Note: When the heater is not in use, the heater should be stored in a dry locaon, away from possible
damage. The power cord should be stored properly to avoid contact with hot or sharp objects.
Disposal of Used Battery
A baery may contain hazardous substances that could be endangering to
environment and human health.
• This symbol marked on the baery and/or packaging indicates that used baery shall
not be treated as municipal waste. Instead it shall be le at the appropriate collecon
point for recycling.
• By ensuring the used baery is disposed of correctly, you will help prevent potenal
negave consequences for the environment and human health. The recycling of
materials will help to conserve natural resources.
For more informaon about collecon and recycling of used baeries, please contact your local municipality, your
waste disposal service or the point of sale where you purchased this item.