Infrared Fireplace Heater OWNERS INSTALLATION AND OPERATING MANUAL Model: SGH-IFP1500 Safety Notice Please read this entire Installation and Operating Manual BEFORE installing and using your new Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property damage, bodily injury, or even death. If your Infrared fireplace heater is not used properly, a house fire may result. For everyone’s safety, FOLLOW all Installation and Operating Directions.
TABLE OF CONTENTS Topic Page(s) Introduction 3 Specifications 3 Safety Information 4-5 Fireplace Placement 6 Fireplace Operation 7 Troubleshooting and Fireplace Maintenance 8 Warranty 9-10 Warranty Claim Contact Information 11 *Contents in the box: 1. Infrared Fireplace heater 2. Instruction manual 3.
INTRODUCTION Thank you for choosing one of the best Infrared absorption fireplace heaters available in the market today. By using this infrared fireplace heater you can efficiently heat up to 1500 square feet! You can even turn down the main thermostat in your home and let this heater carry some of the home heating duty. This fireplace heater is NOT intended to replace your homes furnace; rather it is designed to be a supplement to it.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE HEATER WARNING ! POTENTIAL FOR ELECTRICAL HAZARD! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.
This heater has a self – protection function. If the heater does not operate normally, check cord and heater placement, then UNPLUG IT FROM THE OUTLET & PLUG IT BACK TO OUTLET TO RESET. Grounding This heater is for use on 120 volts. The cord has a plug with three blades for proper grounding. DO NOT attempt to modify the plug in any way or use adaptors to defeat the purpose of the grounding feature. Plug ONLY into a receptacle that accepts three-blade plug.
FIREPLACE PLACEMENT Our Infrared fireplace heater is a very safe and effective room heater. It produces safe, clean and economical heat by utilizing quartz infrared heating elements and heat exchangers. The heating process of the Infrared fireplace heater is similar to the way the sun warms the earth. The infrared elements warm the heat exchangers and the whisper quiet fan distributes the accumulated warmth.
FIREPLACE OPERATION Plug your Infrared fireplace heater power cord into a 120V, 15amp or 20amp three-bladed receptacle. To Turn the Fireplace On: Press the Power button control. on the control panel or on the remote Default Set Temperature: The default set temperature every time the heater is powered on is typically 72°. This default cannot be changed. You will have to set it accordingly every time you power it off.
TROUBLESHOOTING If your heater unit shuts off unexpectedly: 1. Be sure the power cord is plugged into a working electrical outlet. 2. Check for any obstructions. If you find one, turn the hearting unit OFF and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before removing any obstruction. When done, plug in the heating unit and follow the Operation Instructions. If your heater unit tips over: 1.
3 Year Limited Warranty: SOURCE GREENHEAT warrants this heater against defects in materials and workmanship on functional parts, for a period of 3 years from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference.
Warranty Limitations This warranty does not apply if the unit has been subject to negligence, fabrication, misuse, abuse, or repairs (unless authorized verbally, or in writing, by an Authorized SOURCE GREENHEAT Representative) alteration by non-SOURCE GREENHEAT authorized personnel, inappropriate installations, or any case beyond the control of SOURCE GREENHEAT.
Customer Service and Support To Obtain Warranty Support or Advice, Please Complete These Two Easy Steps: Contact SOURCE GREENHEAT PRODUCTS Technical Support E-mail: Warranty@Sourcegreenheat.com Phone: 1-866-484-2066 or 1-214-614-2509 Visit us: www.Sourcegreenheat.com You will need to provide the unit's model number, serial number (located on the heater’s front panel, rear panel, or on the box), date of purchase, retailer of purchase, a daytime phone number, and possibly a copy of your receipt.
