Source GreenHeat Infrared Heater User’s Manual Model# SGH-750 FOR INDOOR USE ONLY 120VAC 15 AMP DEDICATED CIRCUIT The SGH Infrared Heater works with your in‐home furnace to provide supplement heat. Carefully and thoroughly read this manual before using the SGH Infrared Heater for the first time. We recommend keeping this manual for regular review and future reference. This heater is intended for residential use.
Introduction SOURCE GREENHEAT Infrared Heaters utilize the latest infrared heat technology. SGH Infrared Heaters provide a safe, convenient, clean, and economical way to distribute heat throughout your home or business without producing deadly fumes or monoxide gases. Our heating system produces infrared heat that can potentially relieve symptoms of cardiovascular conditions and inflammatory diseases.
Only open heater if instructed by an authorized representative of the manufacturer. There are limited user-serviceable parts inside. Use heater only as described in this manual. Any other use is not recommended by the manufacturer as it may lead to fire, electric shock, and/or series physical injury or death. Heater Specifications SGH Heater Model# SGH-750 Carton Size: 17.3” x 15.4” x 20.9” Heater Size: 14.9” L x 13” W x 17.7” H Net Weight: 24.2 lbs Gross Weight: 27.
makes controlling the unit easy. Operating the heater is logical and can be done on the unit itself or by remote. Unpacking the SGH Infrared Heater 1. First, check the carton to make sure there are no obvious damages that may have occurred during shipment. 2. Open the SGH Infrared Heater packaging and remove the heater by sliding it from the box. You may want to gently and cautiously turn the entire box upside down letting the heater slowly slide out. 3. Remove all the protective materials from the heater.
2) By pressing the 0C/0F/Down button, you can switch the temperature format from Fahrenheit to Celsius and vice versa. 0 0 Press the C/ F/Down to switch from Fahrenheit to Celsius. 3) By pressing the TIME button, the LED display will switch from the temperature status to the TIME status and begin to flash. The default time will display “--“. This means that the TIME is not activated and, therefore, the heater will remain on and continue to heat cycle.
4) Again, the default set temperature displayed on the LED display is 720F. By pressing the TEMP button, the LED display will switch to the temperature status and flash. You must press the HI/LOW/UP button or 0C/0F/DOWN button once again within (5) seconds to set the desired temperature. Each time you press the HI/LOW/UP button, the temperature setting will increase by 10F. Press the 0C/0F/DOWN button and the time will decrease by 10F. The maximum temperature setting is 860F (300F).
1. Be sure not to place the heater in an area where the air flow or air movement is great. 2. Direct the outflow towards the center of the room and not against a solid structure, like a wall for example. For larger areas, place the heater within a central location. 3. The SGH Infrared Heater is designed for maximum efficiency in the 680 F to 740 F range. This is because of the ambient air moving through the heater and out constantly. 4. Existing HVAC heating system vents should be closed.
a. If the Heat Emitter is broken or damaged 0 0 b. If the Control Panel is not responding, the temperature reading is above 86 F/30 C, or there is a burning odor coming from the portable heater c. Or if the power cord is damaged SOLUTION: Contact the manufacture immediately. DO NOT attempt to operate the portable heater as this may cause electric shock, fire, and/or injury. 2. PROBLEM: a. The amount of heated air exiting the front of the portable heater is reduced.
1 Year Limited Parts Warranty: SGH warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. Manufacturer Warranty All SGH products are manufactured with the highest quality materials and are warranted to be free from defects in material and workmanship at the time of purchase.
Use of lacquer or paints in (and around) the heaters Use on Extension Cords/Timers/Surge Protectors/GFCI Outdoor applications Normal wear/tear/weathering Pet/purchaser accidents Purchases from dealers unauthorized by SGH (Authorization in writing) Electrical requirement deficiencies (15-20 amp dedicated outlet required) Heater placed on non-approved surfaces Disclaimers SGH shall not be liable for any loss due to use (or misuse) of the heater or other SGH products or other incidental or
Customer Service and Support To Obtain Warranty Support or Advice, Please Complete These Two Easy Steps: Contact SGH PRODUCTS Technical Support E-mail: Warranty@sourcegreenheat.com Phone: 1-886-484‐2066 You will need to provide the unit's model number, serial number (located either on the heater’s rear panel, or on the carton box), date of purchase, retailer of purchase, a daytime phone number, and a copy of your receipt if possible. Be Patient, Clear, and Concise.
