HR True Wireless Earbuds 8083575
EN · Product Description and Accessories Touch button Indicator light / microphone Charging case Earmuffs x 3 pairs USB charging cable There are different size of earmuffs attached in the package, please select the suitable ones to wear.
■ Operational Guide ● Charge the Headphones During using, if only red light flashes, it indicates headphones are at low battery level, please use them after fully charged. Charging: place the headphones into the charging case Red light lit in a breathing pattern = charging Red light off = fully charged Charging time: about 1.
● Power ON/OFF 1. Power on automatically when taken out from the charging case; 2. Power off automatically while placed into the charging case. ● Bluetooth Connection 1. Two Headphones Mode • Open the charging case to take two headphones out, press and hold • Set mobile phone to search for and connect to “EDIFIER TWS1”, after the touch button of the left headphone to enter pairing state, red and blue light flashing rapidly; pairing is successful, blue light will flash slowly. 2.
■ Functional Operation Instructions ● Music playback (same operation for the left and right headphones) Skip backward: triple tap Skip forward: double tap Pause: single tap Play: single tap ● Call (same operation for the left and right headphones) Accept a call: single tap End a call: single tap Decline a call: press and hold • Clear pairing records: With no TWS and Bluetooth connection, • Disconnect from mobile phone: When the phone is connected, no respectively press and hold the touch button for
■ FAQs Red light instead of blue light flashes. • The headphones are at low battery level, please recharge the headphones. Red light is off during charging. • • Please ensure the headphones are correctly placed into the charging case. When the headphones are not used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit. No sound • • • • Check if the headphones are operating.
■ Maintenance During using, please read the following suggestions carefully. • Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage. • Do not put the product in places exposed to sun or with high • Do not put the product in cold places to avoid damaging internal • Do not dismantle the product.
■ FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
■ ISED Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: • • This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
