User Manual

• DELAY/FREQUENCY (Green LED): When Flanger or Chorus

effects are selected the DELAY knob adjusts the delay time

between the dry and modulating signals. Because of the

similarity between ﬂangers and choruses, a ﬂanger can easily

be adjusted to resemble a chorus and vice-versa. As a rule of

thumb, short delay times create ﬂange effects while long delays

produce chorus effects. Set the DELAY knob between 7 and

11 o’clock for ﬂange effects and between 3 and 5 o’clock for

chorus.

When phaser effects are selected, this knob adjusts the

frequency center point of the phase modulation. Turn the

FREQUENCY knob clock-wise to modulate the phaser over

higher frequencies and give the effect a brighter sound.

• FEEDBACK (Red LED): The FEEDBACK knob controls the amount

of wet signal fed back into the effect. Much like the harmonic

feedback created between a guitar pick-up and an ampliﬁer,

increasing the FEEDBACK on the Orbital Modulator creates

a more resonant and ringing response, giving the effect more

prominence.

Controls: Knobs | 9

OPTION

SELECT

DELAY/FREQ

FEEDBACK

VOLUME

TREMOLO

MIX

(HOLD)

DEFAULT

- Continued

Press button to

select option