Owner's manual

CONTROLS: KNOBS

EFFECT (not labeled)

The effect knob selects which ﬁlter type will be used. There are 23 effect

positions (0 through 22) around the knob as well as a setting for EQ ONLY.

In the EQ ONLY mode, the envelope ﬁlter effect is bypassed but the

equalizer still applies. For information on the individual settings see the

Effect Types section.

SWEEP RANGE

In Envelope and Hot Hand modes, the sweep range knob controls the

direction and breadth of the ﬁlter sweep. The right side of the knob

(labeled UP) adjusts the breadth of the upward sweep, adding greater

range as you turn the knob clockwise. The left side of the knob (labeled

DOWN) adjusts the breadth of the downward sweep, adding greater

range as you turn the knob counterclockwise. In LFO mode the knob also

controls the depth of the upward and downward sweep, but keep in mind

that symmetric LFO shapes (i.e. sine, square, 6 and 8 step triangle, and

random) will sound the same in either sweep direction. Conversely,

non-symmetrical LFO shapes (i.e. rising saw and step sequences) will

sound very different, depending on the direction of the sweep.

EQ ONLY

2 POLE LOW PASS

4 POLE LOW PASS SINGLE PEAK

TRIPLE PEAK

PEAK & NOTCH

PHASERS

8 | Controls: Knobs

SWEEP RANGE

HOT

HAND

MINMIN

DOWN UP

MAX MAX