User Manual

QUICK START
1. POWER
To power the unit, connect the included
DC adapter power supply to
the
9V DC jack (A) on the back panel. Note: Using a different supply
could damage the unit and void the warranty.
2. GUITAR/AUDIO CONNECTIONS
Next, plug your bass (or other instrument) into the jack labeled
GUITAR
IN (B)
via a standard ¼" cable. Connect your amp (or other audio device)
to the
GUITAR OUT jack (C), again with a standard ¼" cable. Both input
and output are mono signals.
3. SENSOR IN (optional)
To use your
BEF Pro with a Hot Hand sensor, connect the sensor to the
SENSOR IN (D) jack and follow any instructions given with the sensor
4. BRIEF KNOB AND PEDAL DESCRIPTIONS
See Controls section for more details.
A EFFECT: selects desired filter type
B SWEEP RANGE: adjusts the direction (up/down) and breadth of the
filter sweep or the depth of the
LFO and Hot Hand modulation.
C FREQUENCY: adjusts the center frequency of the filter
4 | Quick Start
SENSOR
IN
SENSOR
OUT
GUITAR IN GUITAR OUT
9V DC
EXP IN
MIDI IN
A
CB
D