User Manual

Backpage Parameters | 25

EQ Location (EL)

There are two possible

EQ locations within the pedal’s signal chain. The

lowest

LED in the EQ Location column signiﬁes the factory default set-

ting, which places the

EQ after the mix control, thereby affecting both the

wet and dry signal. Selecting the other

LED position applies the EQ only

to the wet signal, leaving the dry signal unaffected.

LFO Shape Control (LS)

The

BEF Pro offers nine different LFO shapes. Within the EQ box on the

pedal’s faceplate, a graphic of each

LFO shape has been placed next its

corresponding

LED selector position. The available LFO shapes are:

1. User Downloadable Step Sequence with Up to

16 Steps (factory set to 6 Step Triangle).

2. Random Steps

3. 8 Step Triangle

4. 4 Step Triangle

5. 4 Step Saw

6. Square

7. Rectiﬁed Sine

8. Rising Saw

9. Sine

Except for the random steps, all waveforms complete their entire cycle in

the same amount of time. The random step waveform does four steps in

that time interval.

The User Downloadable Step Sequence can be customized and saved to

the pedal via an upcoming software tool that will be available on the

BEF

Pro product page at www.sourceaudio.net

USER

- Continued