User Manual

BACKPAGE PARAMETERS

The BEF Pro has some additional editable parameters accessible via

the special Backpage mode. Pressing the

MOD SOURCE and TAP TEMPO

ENABLE

buttons simultaneously enables the Backpage mode, as indi-

cated on the main control panel. All Modulation Source

LEDs and the

Tap Tempo Enable

LED will be lit to indicate that the unit is in Backpage

mode. The Backpage mode can be exited by pressing the two buttons

simultaneously again.

In Backpage mode, the

EQ controls and the Effect knob take on different

functions and the displays will change to indicate the parameter values.

For the

EQ display, there are two letter abbreviations above the columns

that indicate the parameter controlled in Backpage mode. Select the

parameter to be edited with the left and right Band Select buttons and

adjust the value with the knob.

To return to the default Backpage settings, press both Band Select but-

tons at the same time. All Backpage parameters will return to factory

default settings. Unless otherwise noted, all Backpage parameters are

save per preset.

62 125 250 500 1K

(XD) (XC) (OE) (VA) (Q) (EL) (LS)

2K 4K

+12

-12

< >

USER

MOD

SOURCE

TAP TEMPO

ENABLE

(HOLD)

CALIBRATE

BACKPAGE

MODE

ENVELOPE

LFO

HOT HAND

Backpage Parameters | 21

Continued