Owner's manual

Source Audio Soundblox Hub Manager User Guide
Page 4 of 15
it sends out continuous controller (CC) MIDI messages corresponding to a Hot Hand and expression
pedal connected on its SENSOR IN and EXP IN ports, respectively.
Hot Hand X MIDI CC
Configures which continuous controller will carry the X axis data coming from a Hot Hand connected to
the hub’s SENSOR IN port.
Hot Hand Y MIDI CC
Configures which continuous controller will carry the Y axis data coming from a Hot Hand connected to
the hub’s SENSOR IN port.
Expression MIDI CC
Configures which continuous controller will carry the expression data coming from expression pedal
connected to the hub’s EXP IN port.
My Board – Connected Devices
The My Board – Connected Devices view shows the 5 ports on the hub, along with what pedals (if any)
are connected to those ports.
Ports and Pedal Graphics
Click on the image of a pedal below a port number in order to select it and see more detailed
information of that pedal in the status bar below.
Status Bar
The status bar shows the model number, model name, and firmware version of the selected pedal.
Refresh
Click the refresh button in order to have the hub scan each of its ports, confirm which pedals are
connected, and then refresh the display of connected devices.