Instruction Manual

External Control | 19

MIDI CONTROL

The Soundblox 2 Multiwave Bass can be controlled via General MIDI

messages. In order to use the MIDI functionality of the unit, it requires a

Source Audio Soundblox 2 MIDI Adapter. Please check www.sourceaudio.

net for availability. The adapter connects to the Multi-Function input and

provides standard MIDI IN and OUT 5-pin DIN connectors.

Using Soundblox 2 pedals with MIDI greatly extends the functionality of the

units. Having MIDI I/O allows for remote automation, external controllers,

ﬁrmware updates and more. If you have more than one Soundblox 2 pedal,

only one MIDI Adapter is necessary. The Multi-Function output will act as

a MIDI thru to pass the MIDI messages on the other pedals via a Source

Audio SA160 Daisy Chain cable.

For information on using your Soundblox 2 with MIDI and for MIDI

mappings, please visit our website at www.sourceaudio.net.