User Manual
Rear&Connections&
The&rear&panel&of&the&Hub&features&MIDI&I/O,&an&Expression&Input,&and&a&Sensor&Input&for&use&
with&Hot&Hand.&
&
&
&
&
&
&
&
&
&
&&
• Sensor&Input:&Connect&a&Hot&Hand®&receiver&here&using&the&provided&1/8”&TRRS&sensor&cable.&
The&Hot&Hand&receiver&will&be&powered&from&the&Hub.&The&Hot&Hand&signals&will&
automatically&be&routed&to&any&connected&pedals.&&
• MIDI&IN:&Standard&5-pin&DIN&connectors&can&be&used&here&to&connect&a&MIDI&controller&to&the&
MIDI&IN&jack.&The&Hub&can&receive&and&respond&to&a&variety&of&MIDI&commands.&See&the&MIDI&
Features§ion&for&more&detail.&&
• MIDI&OUT:&This&jack&is&by&default&a&MIDI&Thru&connection.&This&means&that&any&messages&
received&on&the&MIDI&IN&port&are&immediately&passed&to&the&OUT&port.&The&MIDI&OUT&jack&
can&alternatively&be&used&to&convert&incoming&expression&pedal&or&Hot&Hand&signal&to&MIDI&
CC&messages.&&To&do&this,&connect&your&Hub&to&the&Neuro&Desktop&Editor,&and&select&&
“Hardware&Settings”&(the&gear&icon).&Change&“MIDI&Out&Mode”&from&“MIDI&Thru”&to&“MIDI&
Out.”&You&can&then&configure&your&incoming&expression&pedal&and&Hot&Hand&signal&to&be&
translated&into&MIDI&CC&messages&using&the&“Hot&Hand&X&MIDI&Out,”&“HOT&HAND&Y&MIDI&
Out,”&and&“Expression&MIDI&Out”¶meters.&&
• EXP&IN:&Connect&a&passive&expression&pedal,&such&as&the&Source&Audio&Dual&Expression&Pedal&
or&Source&Audio&Reflex&Universal&Expression&Pedal.&&The&port&may&be&used&with&a&3rd&party&
expression&pedal,&but&the&connection&must&be&“Tip&hot”&and&the&value&of&the&internal&pot&
should&be&in&the&10k&to&50k&range&for&best&results.&&&&