User Manual

Table of Contents Ultrawave Multiband Processor User Guide
19
MIDI program change (PC) messages, or via continuous controller (CC) messages when accessing the
pedal’s internal presets via the Neuro Hub.
Note: When recalling presets via MIDI PC messages, you may wish to queue up your preset with
effect bypassed. To do this, simply engage the preset, bypass it with the footswitch, then re-save the
preset normally. When recalled, the pedal will load the saved user settings, but the effects will be
bypassed until you engage the pedal.
Copying a Preset to a New Location Using the Neuro App
Using the BURN and SAVE AS commands in Neuro Mobile or Desktop Editors, it is possible to copy
presets to any location in memory.
Clearing all Presets
All 128 User Presets can be erased using the Factory Reset procedure. Warning: The Factory Reset
procedure resets the entire pedal back to the state in which it was originally shipped – this includes
all global settings and User Presets. A Factory Reset will not erase any firmware updates.
  
External Control
Plug an expression pedal, an external footswitch, the Source Audio Tap Tempo Switch, or the Source
Audio Hot Hand 3 Universal Wireless Controller into the Ultrawave’s CONTROL INPUT jack and access
an array of external functionality and expression control.
External Switch
External switches can be used for several different control options. They provide an easy way to
remotely swap channels, tap the LFO tempo, and more. The Ultrawave is compatible with the Source
Audio Tap Tempo Switch.
External Switch Options
There are three main ways the Control Input port is utilized. Below are the possible used for the
Control Input port. Please note that External Switch Options is a global hardware setting.