User Manual

ManualsBrandsSource Audio ManualsFuzzKingmaker Fuzz - STEREO FUZZ EFFECT WITH GUITAR PEDAL

Table Of Contents

Welcome
Overview
Quick Start
- Power
- Guitar/Audio Connections
- Brief Knob, Footswitch, and Button Descriptions
Connections
- Input Side Connections
  - Input 1
  - Input 2
    - Input 2 as an Audio Input
    - Input 2 as a Neuro App Data Input
- Output Side Connections
  - Output 1
  - Output 2
    - Output 2 as an Audio Output
    - Output 2 as a Neuro App Data Daisy-Chain Output
- Power and Control Connections
Basic Fuzz Operation
Effect Types
- Heavy
- Normal
- Octave
- Additional Effect Types
Controls
- Knobs
- Effect Switch
- LEDs
  - Engage / Bypass LED
  - External Control LED
- Footswitch
- Control Input Button
Preset Storage and Recall
- Saving Your First Preset
- Editing a Preset
- Exiting Preset Mode
Universal Bypass TM
Stacking and Parallel Processing “Inside the Box”
- Stacking (Series / Cascaded)
- Parallel Processing
- Series / Parallel Hybrid
Stereo Routing
- Automatic Routing Mode Selection
Parametric EQ
Low Cut Filter
LoRetain
Voice Control
Noise Gate
External Control
- Expression Control
Neuro App
- Main Menu
- Sound Editor
- Browse Sounds
  - Open In Sound Editor
  - Deleting or Publishing Presets
- Hardware Options
- Example Neuro Daisy-Chain Connections
  - Mono Audio Path with Neuro Daisy-Chain
  - Mono-To-Stereo Audio Path with Neuro Daisy-Chain
- Neuro Hub (Formerly the Soundblox Hub)
  - MIDI
- USB
  - USB-MIDI
Specifications
- Dimensions
- Weight
- Power
- Audio Performance
Troubleshooting
- General
- Noise
- Hot Hand Doesn’t Work
- Unit Appears Dead / No LEDs Lit
Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the Kingmaker’s inputs?
- Can I power the Kingmaker directly over USB, without using the 9 Volt supply?
- When connecting the Kingmaker to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Kingmaker respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
Rubber Feet
Waste Disposal Notes
Warranty
- Limited Transferrable Warranty
- Warranty Information
- Disclaimer and Limitation of Warranty
Version History

SA245 Kingmaker Fuzz User’s Guide 6

Output Side Connections

Output 1

This is the primary output. Connect it to your amplifier, recording interface, or the next device in

your effects signal chain using a mono (TS) ¼” cable.

Output 2

Output 2 can act either as an audio output or as the daisy-chain data connection for the Neuro App,

or both.

Output 2 as an Audio Output

The tip contact on Output 2 acts as the secondary audio output. It carries an audio signal when the

Kingmaker is configured with a signal routing that uses stereo outputs. Connect it to your amplifier,

recording interface, or the next device in your effects signal chain using a mono (TS) ¼” cable.

Output 2 as a Neuro App Data Daisy-Chain Output

The ring contact on Output 2 acts as a data connection for the Neuro App, passing data from the

Kingmaker to the next Source Audio effect in your signal chain. You can daisy-chain the Neuro App

data regardless of whether Output 2 is configured to output audio or not. Connect Output 2 to the

next device’s Neuro App Data input (usually Input 2) using a stereo (TRS) ¼” cable. The audio signal (if

applicable) will be on the tip contact of the plug, and the Neuro App data will be on the ring contact.