User Manual

ManualsBrandsSource Audio ManualsFuzzKingmaker Fuzz - STEREO FUZZ EFFECT WITH GUITAR PEDAL

Table Of Contents

Welcome
Overview
Quick Start
- Power
- Guitar/Audio Connections
- Brief Knob, Footswitch, and Button Descriptions
Connections
- Input Side Connections
  - Input 1
  - Input 2
    - Input 2 as an Audio Input
    - Input 2 as a Neuro App Data Input
- Output Side Connections
  - Output 1
  - Output 2
    - Output 2 as an Audio Output
    - Output 2 as a Neuro App Data Daisy-Chain Output
- Power and Control Connections
Basic Fuzz Operation
Effect Types
- Heavy
- Normal
- Octave
- Additional Effect Types
Controls
- Knobs
- Effect Switch
- LEDs
  - Engage / Bypass LED
  - External Control LED
- Footswitch
- Control Input Button
Preset Storage and Recall
- Saving Your First Preset
- Editing a Preset
- Exiting Preset Mode
Universal Bypass TM
Stacking and Parallel Processing “Inside the Box”
- Stacking (Series / Cascaded)
- Parallel Processing
- Series / Parallel Hybrid
Stereo Routing
- Automatic Routing Mode Selection
Parametric EQ
Low Cut Filter
LoRetain
Voice Control
Noise Gate
External Control
- Expression Control
Neuro App
- Main Menu
- Sound Editor
- Browse Sounds
  - Open In Sound Editor
  - Deleting or Publishing Presets
- Hardware Options
- Example Neuro Daisy-Chain Connections
  - Mono Audio Path with Neuro Daisy-Chain
  - Mono-To-Stereo Audio Path with Neuro Daisy-Chain
- Neuro Hub (Formerly the Soundblox Hub)
  - MIDI
- USB
  - USB-MIDI
Specifications
- Dimensions
- Weight
- Power
- Audio Performance
Troubleshooting
- General
- Noise
- Hot Hand Doesn’t Work
- Unit Appears Dead / No LEDs Lit
Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the Kingmaker’s inputs?
- Can I power the Kingmaker directly over USB, without using the 9 Volt supply?
- When connecting the Kingmaker to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Kingmaker respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
Rubber Feet
Waste Disposal Notes
Warranty
- Limited Transferrable Warranty
- Warranty Information
- Disclaimer and Limitation of Warranty
Version History

SA245 Kingmaker Fuzz User’s Guide 22

Note: The parameter range can be inverted by swapping the minimum and maximum position of the

knobs during calibration.

Reset Expression Control Mapping

To clear the expression control mapping (Expression or Hot Hand), first press the CONTROL INPUT

BUTTON and turn off Control Input mode. The CONTROL LED should be dark. Then, press and hold the

CONTROL INPUT BUTTON until the CONTROL LED blinks. This clears all Expression, Hot Hand, and MIDI

mapping.

Neuro App

The Neuro App is available as a free download for iOS and Android devices. Get the iOS version from

the App Store or the Android version from the Play Store. The Neuro App provides access to a

number of parameters that are not accessible on the control knobs, as well additional effect types. In

order to use the Neuro App, use the included 3.5 mm to ¼” TRS cable to make a connection between

the headphone jack on your mobile device and the Input 2 jack on the hardware. The Neuro App uses

special audio signals sent over your mobile device’s headphone jack to remotely control the pedal.

Make sure the headphone volume on your mobile device is set to maximum when using the Neuro

App for the most reliable device to pedal communication.