User Manual

SA245 Kingmaker Fuzz User’s Guide 15
Mono, Dry Thru: INPUT 1 goes to distortion circuit A and out to OUTPUT 1. A copy of the input is also sent
to OUTPUT 2. This is useful especially for bass guitars, where having a dry output is useful in maintaining a
solid low end (this can also be achieved using the Kingmaker’s mix control or LoRetain feature, which are
accessible via the Neuro app and MIDI).
External Loop Pre-Effect: The external loop options allow an external effect (whether a Source Audio
product or a third-party product) to be connected to the Kingmaker’s INPUT 2 and OUTPUT 2. When the
Kingmaker is bypassed, the external effect will be out of the circuit. When the Kingmaker is enabled, the
external effect will be put in series with the Kingmaker’s distortion circuit. OUTPUT 2 should connect to
the external effect’s input, and the external effect’s output should connect to INPUT 2.
In Pre-Effect mode, the guitar signal will go to the external effect first, and then the Kingmaker’s
distortion circuit second.
In Post-Effect mode, the guitar signal will go to the Kingmaker’s distortion circuit first, and then to the
external effect second.
Mono, Dry Thru
2
A
1
EQ
A
1
From Guitar
To Amp (R)
To Amp (L)
External Loop Pre-Effect
X
1
2
1
2
A
EQ
A
External Loop Post-Effect
X
1
2
1
2
A
EQ
A