User Manual

ManualsBrandsSource Audio ManualsFuzzKingmaker Fuzz - STEREO FUZZ EFFECT WITH GUITAR PEDAL

Table Of Contents

Welcome
Overview
Quick Start
- Power
- Guitar/Audio Connections
- Brief Knob, Footswitch, and Button Descriptions
Connections
- Input Side Connections
  - Input 1
  - Input 2
    - Input 2 as an Audio Input
    - Input 2 as a Neuro App Data Input
- Output Side Connections
  - Output 1
  - Output 2
    - Output 2 as an Audio Output
    - Output 2 as a Neuro App Data Daisy-Chain Output
- Power and Control Connections
Basic Fuzz Operation
Effect Types
- Heavy
- Normal
- Octave
- Additional Effect Types
Controls
- Knobs
- Effect Switch
- LEDs
  - Engage / Bypass LED
  - External Control LED
- Footswitch
- Control Input Button
Preset Storage and Recall
- Saving Your First Preset
- Editing a Preset
- Exiting Preset Mode
Universal Bypass TM
Stacking and Parallel Processing “Inside the Box”
- Stacking (Series / Cascaded)
- Parallel Processing
- Series / Parallel Hybrid
Stereo Routing
- Automatic Routing Mode Selection
Parametric EQ
Low Cut Filter
LoRetain
Voice Control
Noise Gate
External Control
- Expression Control
Neuro App
- Main Menu
- Sound Editor
- Browse Sounds
  - Open In Sound Editor
  - Deleting or Publishing Presets
- Hardware Options
- Example Neuro Daisy-Chain Connections
  - Mono Audio Path with Neuro Daisy-Chain
  - Mono-To-Stereo Audio Path with Neuro Daisy-Chain
- Neuro Hub (Formerly the Soundblox Hub)
  - MIDI
- USB
  - USB-MIDI
Specifications
- Dimensions
- Weight
- Power
- Audio Performance
Troubleshooting
- General
- Noise
- Hot Hand Doesn’t Work
- Unit Appears Dead / No LEDs Lit
Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the Kingmaker’s inputs?
- Can I power the Kingmaker directly over USB, without using the 9 Volt supply?
- When connecting the Kingmaker to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the Kingmaker respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
Rubber Feet
Waste Disposal Notes
Warranty
- Limited Transferrable Warranty
- Warranty Information
- Disclaimer and Limitation of Warranty
Version History

SA245 Kingmaker Fuzz User’s Guide 10

Controls

Knobs

Drive Knob

The DRIVE KNOB adjusts the amount of gain applied to the signal. Dial down the drive for a cleaner,

more articulate tone or crank it up for over-the-top doses of fuzz.

Level Knob

Adjusts the output level of the effect. This is useful for setting the level of the fuzz effect compared

to the bypassed signal. Note that because the fuzz effect compresses the signal in the

clipping/saturation stage, the dynamic range of the distorted signal will be less than the dry signal,

and the LEVEL KNOB can be used to compensate for the loss of level that results from this compression.

Bass Knob

The BASS KNOB adjusts a low shelf tone control. Turning the knob clockwise will boost the bass;

turning the knob counter-clockwise will cut the bass.

Treble Knob

The TREBLE KNOB adjusts a high shelf tone control. Turning the knob clockwise will boost the treble;

turning the knob counter-clockwise will cut the treble.

Drive Knob

Effect Switch

Bass Knob

Level Knob

Treble Knob

Engage/Bypass

LED

Engage/Bypass

Footswitch

Control LED

Control Input Button