User Manual
Table Of Contents
- Welcome
- Overview
- Quick Start
- Connections
- Basic Overdrive Operation
- Effect Types
- Controls
- Preset Storage and Recall
- Universal Bypass TM
- Stacking and Parallel Processing “Inside the Box”
- Stereo Routing
- Parametric EQ
- Low Cut Filter
- LoRetain
- Voice Control
- Noise Gate
- External Control
- Neuro App
- Specifications
- Troubleshooting
- Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the L.A. Lady’s inputs?
- Can I power the L.A. Lady directly over USB, without using the 9 Volt supply?
- When connecting the L.A. Lady to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the L.A. Lady respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
- Rubber Feet
- Waste Disposal Notes
- Warranty
- Version History
SA244 L.A. Lady Overdrive User’s Guide 7
Power and Control Connections
DC 9V (Power)
Connect to the included 9 Volt DC power supply. The power supply must be regulated at 9 Volts
(direct current), able to source at least 180 mA (milliamps) of current, and the plug should have a tip-
negative, sleeve-positive polarity (the center tip is ground and the sleeve is power).
USB
Connect to your computer (Mac or Windows) to the L.A. Lady’s USB port (denoted by the icon)
using a standard mini USB cable. The L.A. Lady is a class compliant USB device, meaning that it should
be recognized by Mac and Windows computers automatically. For more information about the L.A.
Lady’s USB capabilities, refer to the USB section of the User’s Guide.
Control Input
The 3.5 mm Control Input port connects to external control devices such as the Dual Expression
Pedal, Reflex Universal Expression Pedal, Neuro Hub, and Hot Hand Motion Controller. For more
information, refer to the Expression Pedal Input, Hot Hand Input, and Neuro Hub sections of the
User’s Guide.