User Manual
Table Of Contents
- Welcome
- Overview
- Quick Start
- Connections
- Basic Overdrive Operation
- Effect Types
- Controls
- Preset Storage and Recall
- Universal Bypass TM
- Stacking and Parallel Processing “Inside the Box”
- Stereo Routing
- Parametric EQ
- Low Cut Filter
- LoRetain
- Voice Control
- Noise Gate
- External Control
- Neuro App
- Specifications
- Troubleshooting
- Frequently Asked Questions
- How do I change the routing mode for my pedal without changing anything about the sounds?
- What kind of instruments can I connect to the L.A. Lady’s inputs?
- Can I power the L.A. Lady directly over USB, without using the 9 Volt supply?
- When connecting the L.A. Lady to a recording interface or mixer, should I used a Lo-Z (microphone) or Hi-Z (line / instrument) input?
- Why doesn’t the L.A. Lady respond to MIDI messages being sent to it?
- How do I enable extended effect types via MIDI?
- Rubber Feet
- Waste Disposal Notes
- Warranty
- Version History
SA244 L.A. Lady Overdrive User’s Guide 10
Controls
Knobs
Drive Knob
The DRIVE KNOB adjusts the amount of gain applied to the signal. Dial down the drive for a cleaner,
more articulate tone or crank it up for over-the-top doses of overdrive.
Level Knob
Adjusts the output level of the effect. This is useful for setting the level of the overdrive effect
compared to the bypassed signal. Note that because the overdrive effect compresses the signal in
the clipping/saturation stage, the dynamic range of the distorted signal will be less than the dry
signal, and the LEVEL KNOB can be used to compensate for the loss of level that results from this
compression.
Bass Knob
The BASS KNOB adjusts a low shelf tone control. Turning the knob clockwise will boost the bass;
turning the knob counter-clockwise will cut the bass.
Drive Knob
Effect Switch
Bass Knob
Level Knob
Treble Knob
Engage/Bypass
LED
Engage/Bypass
Footswitch
Control LED
Control Input Button